By HAN 
How to draw steam engine with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
Draw a square for the cockpit section of the steam engine. To the left of the cabin, add a long rectangle with a curved front. Sketch a long rectangle (slotted in the back) for the bottom part.
Step 2
Draw two halves of curved ovals on the front part to create the bell. Sketch a curved rectangle to form the hood. Add a rectangle in front of the engine to create the chimney. Draw other rectangular details on the side. Add a curved wedge in front.
Step 3
Just above the wedge, draw a slightly angled rectangle. Draw two rectangles for the cab window. Add more rectangles for details on the engine side. Draw a small curved rectangle at the bottom of each bell. Add a dome at the front of the car and at the top of the chimney. Add rectangles in the back to create a device that links the carriages together.
Step 4
Draw four wheels – three large in the back and one smaller in the front. Sketch three curved rods on the boiler section to add detail. Add a diamond on the side of the cabin and a few other rectangular details. Sketch a half oval on the link unit at the back of the car.
Step 5
Add slats to the front cabin windows and a square for the rear window. Sketch the siren coming from the bell closest to the cab. Draw a rectangle between the front and rear wheels and some other details next to the wheel to start creating the pistons. Add a wedge on the spoon and a rectangle in front of the car. Add a few cubes to the details on the side of the engine.
Step 6
Sketch some long, thin rectangles to complete the pistons, roof, and structural details on the engine side.
Step 7
Trace the pencil lines you want to keep with a marker. Remove any extra lines. Use a clean eraser to remove the pencil lines. This helps to avoid pencil marks on the paper.
