HTFunny.com

Category: How to draw animals

  • How To Draw A Swordfish step by step

    How To Draw A Swordfish step by step

    How To Draw A Swordfish with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How To Draw A Swordfish step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1

    Start by sketching the swordfish. Use two curved lines to draw a teardrop shape, pointed at one end but with holes in the other. This outlines the body and tail. From the prologue, extend a pair of lines that meet at a sharp point. This is the upper jaw or the sword.

    Step 2

    Draw pectoral fins. Extend two pairs of curves and allow each pair to meet at a point.

    Step 3

    Draw the dorsal fin. Stretch two curved lines, one from the head and one from the middle of the back. Allow them to meet at one point.

    Step 4

    Draw the tail or caudal fin. Draw a “C” shaped line at the tip of the tail. Draw another “C” shaped line just above it, further towards the tail. Allow lines to meet at points at the beginning.

    Step 5

    Draw eyes. First, draw a curved line near the front of the face. Above it, draw the eye with an inverted “U” shaped line. Cover a quarter of the circle in the corner to form the pupil. Draw a curved line above the eyes to indicate the eyebrows.

    Step 6

    Draw the open mouth of the fish. Draw a curved line on the base of the sword and a “U” shaped line below it. Draw a curved line from the “U” arc to the corner of the mouth. In the corner of the mouth, use three lines to draw a partially curved rectangle.

    Step 7

    Remove overlapping lines from the mouth. Then draw the gills using two curved lines. Draw a curved line from below the dorsal fin to the tip of the tail to indicate the fish’s belly.

    Step 8

    Draw the anal fin. Extend a pair of curved lines from each side of the belly at the base of the tail. Allow each pair to meet at a sharp point.

    Step 9

    Line the dorsal fin with curved lines.

    Step 10

    Color your cartoon swordfish. These fish are usually gray or bluish above and white or cream below. They may also have blue patches on their fins and sides.

    how to draw a swordfish

     

    You can see more drawing:

     

  • How to draw a warbler bird step by step

    How to draw a warbler bird step by step

    How to draw a warbler bird with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw a warbler step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1:

    First, draw a wide head at the neck, then shrink it to a pointed beak.

    Step 2:

    For the face, draw a series of circles extending from the beak to the back of the head. Add a beak to the mouth.

    Step 3:

    Next, draw the body. Use small zigzags and lines to make feathers. Leave space at the top for the wings.

    Step 4:

    Next you will draw the tail. Draw a series of short lines to make the tail straight

    Step 5:

    Wings similar to Step 3. Draw a rough oval for the wings, then add lines and zigzags to make the feathers.
    Finally, color.

    How to draw a warbler step by step

    You can see more drawing:

     

  • How to draw realistic dragonfly step by step – Easy drawing dragonfly

    How to draw realistic dragonfly step by step – Easy drawing dragonfly

    How to draw realistic dragonfly with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw realistic dragonfly step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1

    Body sketch
    We can start by drawing a simple vertical line along the page with a pencil and a ruler. We want to create a simple line through the page to help us draw the dragonfly’s body symmetrically. From here we can start drawing the dragonfly’s head and body. A good suggestion is to take an image from the internet as a reference, however, that is not necessary.
    The head and body or thorax can be depicted as a bean-shaped shape connected by two circles. The circles will be the eyes and the beans will be the body/chest of the dragonfly.
    drawing dragonfly 03 The most important aspect to remember is keeping symmetry throughout the dragonfly’s shape and form. This means that the shape should be the same on both sides of the vertical line. We want to make sure that we draw two equal circles for the eyes and the body will look like a bean shape on either side of the vertical line.
    drawing dragonfly 04 From there we can go down to the body structure of dragonfly drawing. When we create a realistic dragonfly drawing, using a reference image helps us to create the most accurate body shape possible.
    In the next section, we want to draw the lower part of the chest, which can be described as an upside down cone.
    draw dragonfly 05 The chest will flow into the narrow cerci of the dragonfly. The cerci resemble the long tail of a dragonfly, and its shape resembles a thin rod. This thin stick-like structure will have subtle protrusions and curves, which should be as symmetrical as possible either side of the vertical.
    drawing dragonfly 06 Dragonflies can be thought of as totem pole-like structures that have a pattern on their cerci/tail structure. Again, use the reference image to see how you can draw these patterns, but you can also try making your own.
    The main aspect to remember is to keep it symmetrical, which will give a realistic effect. Finally, the bottom part of the cerci has two downward facing horns.

    Step 2

    Leg sketch
    We want to continue using our pencil, now we will proceed to draw the dragonfly’s legs. The first two legs will emerge from the eyes and have a delicate arched shape. Legs should be symmetrical on each side of the dragonfly.
    The second pair of legs will follow suit and are shaped like the first, except they will grow out from either side of the chest.
    draw dragonfly 07 The lower legs will point downward and perpendicular, growing from the bottom of the chest. These legs will be straight and not bent at the joints like the two above. Finally, all the pins can be divided into two parts, indicating that they have joints.

    Step 3

    Sketch the wings
    We’ll start with the top or front wings first, which can be drawn with our pencil. The shape of the wings can be thought of as spearheads growing from the sides of the chest in a horizontal fashion.
    They must be the same length as the dragonfly’s entire body.
    draw realistic dragonflies 09 Lower or hind wings will match and have the same shape, however, they will grow out from below the chest a bit. Both wings will have this spike shape and point slightly upwards instead of downwards. You want the wing to curve slightly upwards.
    draw realistic dragonflies 10 When drawing the pattern of veins/webs inside the wings, we don’t need to worry about symmetry. The vein pattern of the wing will grow from the inside near the chest, then they will disperse throughout the wing.
    drawing realistic dragonfly 11 These lines can be quite chaotic in the way they scatter through the structure of the wings. However, we wanted to make sure there were darker lines near the chest and thinner lines near the bottom of the wings.
    The top line or edge of each wing must also be thicker and darker than the bottom line or edge of each wing.
    You can play around how you allow lines to scatter in each wing. Try to remember that line structures can be sporadic and inconsistent looking like branches in a tree. However, as long as the thicker lines remain near the thorax and top of the wings.
    draw realistic dragonflies 13 You want to spend time with wings, this is because you don’t want the wings to look symmetrical. However, you want to make sure that they follow the shape of the wing tip shape in the horizontal direction. In addition, all ribbed structures will curve downwards on the wing.
    dragonfly sketch 15 You also don’t need to add too many lines inside the wing, as this can overwhelm features and won’t look good.
    Again, it’s a good idea to look at pictures of dragonflies on the internet to get an accurate sense of how the wings are formed and how the veins are dispersed throughout the wings.

    Step 4

    Shading the body with a ballpoint pen
    Dragonflies are predominantly black and ballpoint pens are a great way to add shade while preserving the vivid dark tonal value in this insect. Welsh may start near the eyes and upper chest; we can make the eyes mostly black with a bit of white for brightness.
    dragonfly sketch 16 As we move over the chest we can color around the patterns inside the body where we can make some areas in the chest darker and others a little lighter . We wanted to make sure we left the patterns on the chest free from shadows, though we could add small dots to suggest texture. For the legs, you can color with a ballpoint pen, but try to leave white spots here and there.
    This will give the legs a more three-dimensional quality as it will suggest gloss on the smooth exoskeleton. Around the chest, you can add small lines to give the dragonfly feather quality.
    dragonfly sketch 18 As we move down the full body structure, we can make it predominantly black with our ballpoint pen. That being said, we want to make sure that when we go over the chest and the cerci we don’t touch the samples.
    dragonfly sketch 19 Dragonflies are mostly black, so you can simply paint the entire body/tail structure black. You want to make sure your color is around the patterns, leaving them white so that they contrast with the dragonfly’s black body.
    dragonfly sketch 21 Again, think of a dragonfly’s cerci or tail as a totem figurine. You want to make sure that all the patterns are symmetrical and not touched with the ballpoint pen. You can add small dots.

    Step 5

    Fill in the wings with a ballpoint pen
    With the wings, the process is a bit simpler since we drew all the lines with a pencil. However, this time it will be simply going through all the lines with our pen. We want to darken and thicken the lines near the chest and along the top of the wings.
    dragonfly illustration 23 We only want the lines near the chest to be thicker because this shows that the skeletal structure or veins are firmly and firmly attached to the chest. As they disperse through the wings, their structure becomes thin and faint.
    The lines don’t need to be thick over the entire wing, just near the top and near the chest.
    Near the tip of the wing, at the end of the spike, we can draw a dark mass called a pterostigma. These are the iconic features inside the dragonfly’s wings and are located at the top of all four wings, near the edge of each wing.
    dragonfly illustration 25 You just want to spend some time reviewing the lines you drew with a pencil. Try to take your time and be careful, you don’t want any unwanted marks drawn with the pen. The wings should have a matte and subtle quality, which means the lines will be mostly light all over the wings. With your pen, you can also add in small diagonal lines, hinting at a mesh quality inside the wing. Dragonfly wings have a mesh structure; however, it is very faint in the wings.

    Step 6

    Add some color
    Now we can add some color to the dragonfly drawing with simple colored pencils. We can do this by choosing two colors, because dragonflies are never too colorful but have a set of two colors inside their bodies.

    How to draw realistic dragonfly step by step

     

  • How to draw a cock step by step – Easy drawing a cock

    How to draw a cock step by step – Easy drawing a cock

    How to draw a cock with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw a cock step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1

    Start drawing by marking.
    First, you need to note the position of the head and body of the rooster. Draw a circle and add an oval below it.how to draw a rooster easily

    Step 2

    Draw a rooster’s neck.
    Now you should connect the previously drawn shapes with two curved lines as shown in the picture.how to draw a rooster step by step

    Step 3

    Add the rooster’s eyes and beak.
    To represent the eye, draw a circle inside the outline of the head, while also adding a dot inside it. Draw a pointed beak.how to draw a rooster easy step by step

    Step 4

    Add the rooster’s comb and earrings.
    Describe the elements below the rooster’s head using curved lines of different lengths and add a comb on top of the head. How to draw a cartoon rooster

    Step 5

    Draw the outlines of the rooster’s wings and tail tip.
    On the side of the body, draw the wings with dashed lines of different lengths. Draw a curved line on the right side of the body.how to draw and draw a rooster

    Step 6

    Continue drawing the rooster’s tail.
    To make a rooster’s tail consisting of individual feathers, draw several arcs of different sizes, as shown in the figure.how to draw and color a rooster

    Step 7

    Finish drawing the rooster’s tail.
    Now add more arcs and curves of different lengths to represent the pointed feathers on the rooster’s tail.how to draw a cartoon rooster step by step

    Step 8

    Outline the top of the rooster’s legs.
    Below the body of the rooster drawn earlier, draw curved lines, as well as four lines of different lengths. how to draw a simple rooster step by step

    Step 9

    Finish drawing the rooster’s legs.
    Add the cock’s pointed fingers and claws using curved lines as shown. One leg is partially closed.how to draw a colorful rooster

    Step 10

    Draw the rooster’s plumage.
    On the neck, wings and body, add more curves and circles of different lengths, as shown in the picture. easy way to draw a rooster

    Step 11

    Prepare the drawing for coloring.
    Now you should use eraser to remove all unnecessary elements from your drawing and prepare for coloring. drawing rooster step by step

    Step 12

    Color the picture.
    To color the rooster, use red, brown, yellow, gray and orange. Don’t forget to mark the dark and light areas.how to draw a rooster

    How to draw a cock step by step

  • How To Draw A Snake step by step – Easy Drawing A Snake

    How To Draw A Snake step by step – Easy Drawing A Snake

    How To Draw A Snake with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How To Draw A Snake step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1:

    Draw your snake’s head
    Start drawing your snake by drawing a slightly curved head shape.

    Step 2:

    Draw the middle body
    Draw the neckline from the underside of the head, facing downwards. This part will also be slightly curved but in the opposite direction to the head.

    Step 3:

    Added rear body and tail
    Continue to flex the back body and add a sharp turn that will represent the end of the tail.

    Step 4:

    Draw a belly for you Draw a snake easily
    Draw individual segments that flex with your snake’s body. In your snake’s head, draw a small circle to represent the eyes.

    Step 5:

    Add the first layer of color paint
    Using a regular brush and brown paint, evenly cover the whole body of the snake.

    Step 6:

    Add a secondary coat of paint
    With the same brush you used earlier, switch to light brown paint and evenly color the belly of your snake drawing. Finish with a smooth, sharp brush and dark gray paint, and fill in the eyes.

    Step 7:

    Shading in your snake sketch
    Pick a small, soft brush and paint in a light brown color, while adding a soft secondary coat between the bottom half of the neck and the top of the head. Continue this process on your snake’s body.

    With a small brush and black paint, add shadows along the top area of the head, the curves at the neck, the rest of the body and the tail.

    Step 8:

    Texture your snake drawing
    Start this step with a pattern brush and brown paint, and paint individual diamond pattern scales on the face and neckline of your simple snake drawing. Repeat this step with black, dark brown, and light brown paint, and paint along the rest of the body and tail.

    Step 9:

    Identify the features of your snake drawing
    Pick a thin, sharp brush and paint it black, then trace the outline of the diamond pattern on your snake’s skin. Once done, paint the mouth with black paint. Continue with white paint and apply soft highlights on each scale pattern. Repeat with light brown paint, and paint several spots to create variety and depth.

    With a soft brush and white paint, add soft brush strokes along the curve of your snake drawing to add realistic highlights.

    Step 10:

    Belly texture
    In this step you will start adding textures to create a more realistic snake drawing! To do this, you will need to choose a soft brush and paint brown and add a soft blend of colors along the belly. Repeat using black paint and add some dark spots along the scales. Pick a blend brush and smooth these newly painted areas.

    Step 11:

    Mark the abdomen
    To add highlights to your snake sketch, use a smooth brush and paint white and add soft brush strokes to the bottom of your snake’s belly. For the upper part of the belly, add more intensity to the highlights. Apply a final center line marker. Complete this step by adding a soft highlight to the eye of your snake drawing.

    Step 12:

    Add background shadow
    With a soft brush and black paint, add a soft shadow just below the snake. Choose a blend brush and smooth the edges of your shadow.

    Step 13:

    Perfect your simple snake drawing
    Use a smooth brush and corresponding colors, and trace the entire outline and any internal texture lines for a flawless and seamless look!

    Well done our tutorial on how to draw a snake! You just created your own realistic snake drawing and made it look so easy! We hope you learned some new and important drawing skills that you can take with you and apply to your other drawings!

    How To Draw A Snake step by step

  • How to Draw a Lion Step by Step – Easy drawing a Lion

    How to Draw a Lion Step by Step – Easy drawing a Lion

    How to Draw a Lion with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to Draw a Lion Step by Step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1:

    Create the shape of the main body
    To start drawing your lion, create a large and long horizontal oval on your canvas. Our top advice for this first step of your lion drawing is to place the oval of the main body in the center of your drawing.

    You also want to make sure that there is plenty of space on all sides of the main body where you will be drawing the limbs and head.

    Step 2:

    Start drawing the lion’s head
    Again, we’ll use a long oval to shape your lion’s head. The oval construction of the head should be significantly smaller than the main body.

    You want the head oval to be almost vertical but slightly tilted to the left.

    Step 3:

    Plan a lion’s tail
    To create the basic shape of the tail in your lion sketch, draw a curved shape starting at the top of the main body oval.

    Step 4:

    Shaping the hind legs
    Our lion appears to us as if lying on its side, so the legs (one front and one back) on the other side of the lion will be partially hidden. This difference of opinion is why construction lines can be so useful. Start by drawing the upper thigh of the lion’s paw closest to us. One end of the curve will start at the bottom end of the tail. Below this thigh, draw the bottom of the leg slightly forward, then add an irregular oval to represent the foot.

    For the second back foot, just repeat these steps, but remember to keep the back half of one leg behind the other.

    Step 5:

    Standing in front of the lion
    If you look at the image below, you’ll see that the lion’s front paws have a very different shape than the hind legs. Start by drawing the leg closest to you, drawing two curved lines that extend slightly forward. Add a split line just above the bottom of the leg and then add an uneven oval to represent the leg of your lion sketch.

    For the second leg, repeat this process but this leg should extend straight down and it should be partially blocked by the other front leg.

    Step 6:

    Detail Drawing of a Lion’s Head
    In this step, you will use four lines to create the base structure for the facial details. These lines will help you when you want to know how to draw a lion face. Start with a large vertical line that runs through the center of the lion’s head drawing and curves toward the front of the canvas. Next, draw three curved horizontal lines towards the bottom of the canvas.

    The two bottom lines will help you place the right nose and mouth closer together near the bottom of the oval on top.

    Step 7:

    Sketch the shape of the ear
    This step is very easy and quick. All you need to do is place an incomplete oval on either side of the head oval.

    Step 8:

    Shaping the lion’s mane
    The lion’s mane is very beautiful and detailed. In this step, we just need to contour the mane with a line.

    Draw a mane shape around the head, which flows to the floor and covers a significant portion of the front legs and main oval of the body.

    Step 9:

    Create the final sketch of your lion sketch
    Now that you’ve drawn all of your construction lines, it’s time to use them to create the final contour of your lion drawing. Start by outlining the ears and use facial contours to place features. On the top horizontal line, draw eyes on either side of the vertical line. On the center horizontal line, draw the nose with the center running along the vertical construction line. On the bottom horizontal construction line, draw the mouth. Perfect the facial details using short strokes to shape the contours of the face and the lion’s chin.

    As you move down the body, don’t outline the mane shape as we will do this in the next step. You also don’t want to outline anything in the mane shape, start outlining your body after it’s over.

    Curl the lion’s back down and up to join the tail contour. You can outline the rest of the body by sticking pretty close to the construction lines. When you get to the foot section, use small curved lines to create the toes for your lion sketch and add a small nail to each toe.

    Step 10:

    Shaping the lion’s mane
    In this step, you’ll use the mane build shape to help you create the final contour. When sketching a lion’s mane, you want to use short wavy strokes to give the impression of fur. Towards the bottom, you want to bring the mane to small, flame-like spots. You want all currents to flow in the same direction downwards. Add additional lines and coats in the wider mane shape.

    Once you’ve completed this step and are happy with your mane, you can erase any construction lines that are still visible.

    Step 11:

    Add texture details to your lion sketch
    Now comes the fun step in our “drawing lion” tutorial. In this step, you will use a series of

    short and long lines to create a fur pattern all over the lion’s body. Start by texturing the mane using long lines. You want to make sure that all your lines follow the curve of the mane. On the face, use a combination of dots and short lines to add texture around the mouth, nose, eyes, and ears. While you’re here, let’s add some contour to the face shape to give it more depth.

    As you move up the body, use short strokes to contour the legs, belly, and end of the lion’s body.

    Step 12:

    Add the first color layer
    To create realistic colors in your lion painting, you will need to color in different layers. To start, use light brown or light brown to color the entire body of the lion.

    No matter what medium you are using, make sure that you create a smooth and even coat without any major smudges.

    Step 13:

    Dimensioning with Shading and Highlights
    You will now breathe some life into your lion sketch by adding some highlights and shadows. Start by creating a shadow with a bit of black and a soft brush. Use this black to shade the lion’s frame, including the upper back, tail, belly, and between all the legs.

    For all your shadows, go soft with black and try to blend it as smoothly as possible. You can always add more shadows, but you can’t remove them once enabled.

    Add some shadows to the facial structure, around the nose, on the forehead, inside the ears, nostrils and in the lower lip. At the end of this step, use a little white paint to create accents throughout the body. Focus the white on the lower half of the lion’s face, just below the eyes, on the front of the hind legs and apply all over the body.

    Step 14:

    Draw details on the mane
    The base color for the lion’s mane is dark chocolate brown. Use this shadow to fill in the shape of the mane and color the tip of the tail.

    Step 15:

    Add the final strokes of the highlight
    Now that we have the base color of the lion’s mane, it’s time to embellish it with some highlights. Using a small soft brush and a light beige color, add a fade effect to the lion’s mane. Starting at the outer edge of the mane, add more light brown highlights as you get closer to the lion’s face. Complete the highlight of the mane by adding a bit of gray to the mane just below the chin.

    Now you can repeat this marking process on the small part of the lion’s tail.

    Step 16:

    Perfect your lion drawing
    You’re almost done with your lion drawing, and we’ve reached the final step. This step is optional, simply providing a more seamless finish. You can achieve this by erasing the outlines of your lion sketch. If you are using a drawing tablet, this is very easy for you. If you are using a physical vehicle, simply use the corresponding shade at each point to track it.

    If you joined this tutorial and want to know how to draw a lion, we hope to have answered this question for you. Now you know how to draw a lion’s face and body easily and how to create realistic colors. Hope you enjoyed this lion drawing tutorial and you feel more confident creating lifelike lion drawings.

    How to Draw a Lion Step by Step

     

  • How to draw realistic spider step by step – Easy drawing realistic spider

    How to draw realistic spider step by step – Easy drawing realistic spider

    How to draw realistic spider with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw realistic spider step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1.

    Derwent graphite pencil. These are the most common types that come in sets and they are of very good quality. Remember that 9B is the softest and darkest while H is the hardest and lightest.

    Step 2

    Okay, here’s a crash course on Spider anatomy. The body of the spider has two parts. The first is the cephalothorax which includes the head and thorax. The second part is the abdomen. The spinners are located at the end of the abdomen and

    Step 3

    Start by sketching two ovals for the two parts of the body. Divide them down the middle for reference purposes.

    Step 4

    Next, draw the legs and feet. Note that they are all divided into five sections.

    Step 5

    Now you can start shading around the spider to give it more form. Keep the shade pretty light for now.

    Step 6

    Now we can start shading. I decided to start with the head. Remember to use pencil B to create shadows. I used 8B and 9B. Notice also how I put more emphasis on the five most important limbs; now easier to see sections about them.

    Step 7

    I recommend using a pencil in the HB to 3B range for this next step. Start by lightly sketching in the leg hairs. Notice how they all lean away from the body.

    Step 8

    I recommend using a pencil in the HB to 3B range for this next step. Start by lightly sketching in the leg hairs. Notice how they all lean away from the body.

    Step 9

    After the first layer, add another layer with a darker colored pencil. Repeat this process with the other pins.

    Step 10

    This is the result of the previous steps. I also went ahead and started working in the background. Don’t worry about making those strands perfect.

    Step 11

    I go ahead and sketch the first layer of hair for the rest of the legs in this step. I also added another rock to the background.

    Step 12

    This is the result of adding a second dark layer to the legs. I decided to start darkening the ground around the spider in this step. Also, note the hair instructions on the spider’s back.

    Step 13

    This step sees further growth of the ground around the spider. I suggest using 8B and 9B for that. I also added a second layer to the spider’s back.

    Step 14

    Add a third layer to the spider’s back and you’re done. The next step depends on your level of detail. All that’s left to do is add details. Your kneadable eraser and mechanical pencil are irreplaceable when doing this step. Y

    Step 15

    Here are the final products. After at least 7 hours working on this drawing, I felt like putting in as much detail as possible. Again, it’s really up to you to decide how much detail you want in your drawing. I hope this guide was helpful!

    How to draw realistic spider step by step

  • How to draw a realistic hummingbird step by step – Easy drawing hummingbird

    How to draw a realistic hummingbird step by step – Easy drawing hummingbird

    How to draw a realistic hummingbird with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw a realistic hummingbird step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    How to draw a realistic hummingbird step by step

     

    Step 1

    Just draw an oval for the head and a small circle inside for the eyes. Please don’t worry about the exact scale, just try to make it as close to the example image as possible.

    Step 2

    Add an elongated oval connected to the head. This will be the body.
    Make sure that the place where the body and head meet is below the head and not above the head.

    Step 3

    Create a semicircle on the bottom right of the body shape. This will be the tail.

    Step 4

    Add raised wings above the body. Place a long, thin beak on the right side of the head.
    Another feature of hummingbirds is their beak, which they can poke into even the narrowest of flowers for nectar, so make sure to install this correctly.

    Step 5

    Sketch the shape of the bird on the sketch. Use a frill to the body to recreate the shape of the small feathers. Shape the wings and draw both small and large feathers inside. Drawing feathers for the tail is fine.

    Step 6

    Draw lines with black ink. Try to create a modular line, go from thin line to thick line and vice versa. This will make your drawings look better and more professional.

    Step 7

    Draw two flowers in front of the bird’s beak in the pose of a bird sucking nectar.

    Step 8

    Remove the pencil from your drawing and start coloring. Look at the illustration for reference.

    how to draw a realistic hummingbird

  • How to draw two cute penguins step by step – Easy drawing cute penguins

    How to draw two cute penguins step by step – Easy drawing cute penguins

    How to draw two cute penguins with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw two cute penguins

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

     

    Step 1

    Sketch the head and body of the penguins
    Start drawing with the outline of the penguin’s head and body. Make sure to leave some space above the head for the “fluff” and one space below the body for the feet, drawing the second bird with its head close to the other as if they were kissing.
    Draw the top sections of the head into a large curved line with smaller lower curves down each side of it for cheeks.
    Draw the sides of the body with two smooth curves and give it a slightly flat-looking bottom.

    Step 2

    Drawing penguin feet
    Coming out from below the body add feet. Give each bird three toes with smooth curves in between them to show that they are webbed (like a penguin’s feet).

    Step 3

    Drawing penguin flippers
    On the sides of the body, just below the head/cheeks, add flippers. Make each one wider near its base and narrower as it comes out. You can also draw each one with a slight downward curve following its shape.
    Once done, delete the parts of the body contour that you added them to.

    Step 4

    Drawing penguin eyes
    Draw each eye in an upside down “U” shape. Touching the inner corners of the eyes, draw another set of similar shapes for the pupils.
    Inside the pupil draw a pair of small ovals for highlight/reflection.

    Step 5

    Draw the beak of a penguin
    Just a little bit under the eyes draw the beak. Shaped a bit like a flat lemon. Inside it draw the mouth as a slight curve.

    Step 6

    Drawing penguin head feathers
    To make the penguin look a little more interesting, add a bunch of small feathers to the top of its head.

    Step 7

    Penguin line drawing
    To complete the penguin feather sketch. It should start at the top of the beak, then wrap around the eyes and cheeks, then follow the curve of the body.
    After you have sketched all the parts of the penguin, you can outline your drawing with a black pen, marker, or darker pencil lines.

    Step 8

    drawing penguins
    However, if you want your drawing to have a bright color similar to the penguin in the example then a marker can be a good choice, however you can also use paint or a pencil color if desired.

    how to draw two cute penguins

  • How to draw 3D Blue Tail Skink Lizard step by step -Easy drawing blue tail skink lizard

    How to draw 3D Blue Tail Skink Lizard step by step -Easy drawing blue tail skink lizard

    How to draw 3D Blue Tail Skink Lizard with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw 3D Blue Tail Skink Lizard step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1

    form the head
    First, contour the top of the skink as shown. Then draw an oval for the eye and a small dot for its nostrils.

    Step 2

    Draw the body
    Next, draw two long lines to form its body.

    Step 3

    Tie tail
    Now, attach its long tail by drawing a wavy pointed shape.

    Step 4

    extra legs
    Form the shape of its slender legs attached to the lower part of the body. Then draw a shape of its clawed foot similar to the illustration. Don’t forget to delete the parts of the body that coincide with the legs!

    Step 5

    Draw the lower abdomen
    Draw a line following the skink’s body shape to outline its bottom.

    Step 6

    Complete the Skink drawing
    Add some color to your skink paint! First, fill in the eyes with a black pencil. Add some shimmer with a white pencil. Next, use a cream crayon to polish the lower abdomen and legs. Now, color the tail with a blue pencil. Then add two yellow lines along the skink’s head and body. Finally, color the rest of the reptile’s body with a dark gray pencil.

    How to draw 3D Blue Tail Skink Lizard

  • How to draw a realistic horse step by step – Easy drawing a horse

    How to draw a realistic horse step by step – Easy drawing a horse

    How to draw a realistic horse with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw a realistic horse step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1:

    Build the main body of the horse
    For all of our animal drawing tutorials, we always start by using construction shapes and lines. Construction lines are simple and easy-to-draw shapes that help us build a basic outline of the animal before we start adding intricate details. Construction lines are used by professional artists and beginners alike, and they are sometimes considered an artist’s best kept secret.

    To start drawing the horse, we will use a long, horizontal oval to represent the main body of the horse. This first step may seem simple because even though it’s just an oval, you need to make sure it’s perfectly placed on your page.

    Around this oval you’ll be adding other limbs and details, so you need to make sure there’s plenty of room so your horse doesn’t get a flat neck.

    Step 2:

    Build a horse’s head
    The second step in this easy pony drawing tutorial is also a simple construction step, but it’s essential. In this step, you will use a small circle to represent the head in your horse drawing. To the right and above the main body building oval, draw a small circle. You want the circle to be directly above and in front of the main oval.

    At this stage, it may seem strange that your horse’s head is hanging away from the body. In the next few steps, you’ll draw the pony’s neckline to join the two body parts together.

    Step 3:

    Build a horse’s snout
    Before connecting the head to the body, you need to quickly raise the horse’s muzzle. For the muzzle, you’ll use an oval that’s tilted at a 45-degree angle to the bottom right corner of the page. The top of this oval will overlap quite a bit compared to the top circle.

    Over the next few steps, you’ll use this oval to help perfect the shape of the horse’s head and nose.

    Step 4:

    Building Horse Neck
    Finally, it’s time to combine your horse’s head with its body. Start with a curved line starting at the top of the head building circle and curving down to the top of the body oval. You want this line to join the body oval just before the midpoint. Use another, smaller curved line to complete the neck, starting just below the horizontal midpoint in the head circle and connecting this line to the torso. You will use these lines to help you complete the final contour of the horse’s neck in the following steps.

    At this point, you can begin to see the silhouette of a horse poking through the construction lines.

    Step 5:

    Horse ear shaping
    Adding horse ears instantly transforms your construction drawings and helps you see the horse come to life. To create the ears, you will use two ovals of slightly different shapes. Start where the neckline joins the top circle. At this point, draw a long, thin oval with a point at the top. This front ear will look a bit like a long petal. Just behind this first ear, draw another oval that is larger and not as pointed.

    The difference in ear shapes is a result of the perspective we are using for this drawing of the horse.

    Step 6:

    Build a ponytail
    For all the steps so far, you’ve used shapes to represent different parts of the horse’s body. In this step, you will use a freehand curve to give the general shape of the ponytail. The horse we are drawing is moving, so the tail will flow backwards.

    It may take a few tries until you’re happy with your tail shape, but be patient, these take time.

    Step 7:

    Raise the horse’s first front leg
    We have divided the steps of drawing a horse’s legs into several parts because they are said to be the most difficult part of drawing a horse to nail. In this first step of drawing the horse’s legs, we will deal with the front and rear legs. Start by drawing two small circles about a centimeter apart. These two circles represent the two joints in the front legs.

    The top ring should align with the top circle and be about the same distance from the body as the head.

    Attach these circles to the main body oval using two lines as wide as the circles. You want to make sure that these lines are not two solid lines all the way down the leg. Instead, you want the lines to split in the middle of the circles. At the bottom of the bottom circle, draw a small curved triangle. This triangle will be the outline for your horseshoe.

    Step 8:

    Raise the horse’s second front leg
    In this step, you’ll use the same process to build the second front leg. This front leg is the leg closest to us and it bends when the horse is in motion. Again, you want to draw two circles to represent the joints, but these need to be in slightly different positions.

    If you’re using two circles for the first front leg as a guide, then you want the top circle for this second leg to be behind but in between them.

    Then you can draw a second circle just below the first n

    and about a centimeter behind it. Use two lines to connect these circles to the main body and to each other. Since this front leg is closest to its intended use, you can make the leg a bit wider in the upper part, where it joins the oval of the body. The final part of this step is to draw a teardrop shape around the bottom circle. This round teardrop shape will represent the nail for this foot.

    Step 9:

    Build the first hind legs of the horse
    You know discipline from now on. In this step, you need to put your hind leg closest to you. The two matching circles should align with the two loops on the front leg. You also want to make sure that the bottom circle is in front of the top circle. Since the latter is the leg closest to us, you want the top of the leg to be fairly wide.

    Finish this step by drawing another slightly curved triangle extending from the bottom circle.

    Step 10:

    Build the last leg of the horse
    This step is the final step to draw the horse’s legs. Start over with your two common circles, placing these higher than the others. Then draw lines that are visible from our perspective, connecting them behind the hind legs you just drew. Finish this leg with a curved triangle for the final nail.

    Step 11:

    Draw the outline for the horse
    At this stage of our easy horse drawing tutorial, you’ve done most of the heavy lifting. Now it’s time to use a thin outline to give your horse the final shape. Using all the construction lines you’ve drawn so far, you’ll use a darker pencil to outline your horse. You can start at any point and gently add a few curves to your contour so you don’t stick too closely to the build lines.

    When sketching the legs closest to us, you need to line the horse’s belly to add some shape and perspective.

    Around the joints in the legs, add a small bump in your contour. You can also draw some more stripes along the bottom of the horse’s chest and neck to make it look a bit more muscular. On the head, follow the construction lines fairly closely, but don’t follow the depression between the circle and the oval in the muzzle. At the bottom of the nose, add the small curves you can see in our example, and also add the nostrils and eyes to the face. Outline the ears and add a few small curves inside them to add depth and detail.

    Step 12:

    Draw the tail and the main blow in the wind
    Now that we have a general outline of your horse, it’s time to draw the mane and tail. The way we are going to draw these hair features will help give the impression of movement. Use a sharp pen or pencil to draw many curved lines toward the horse’s back. For the mane, start around the ears and start drawing a few small wavy lines in the right direction. Continue moving down the back of the horse’s neck, making the hair longer as you go further to the back.

    For the tail, use the shape line as a guide and draw lots of loose and overlapping strands until you’re happy with the fullness.

    Step 13:

    More details on the horse’s legs
    In this step, you just need to add details to your horse’s legs. Using construction lines, add some curves around the matching circles and add a few small lines in the areas of the legs that will have shadows. You can also add small strokes along the legs to give the impression of fur in some places. Draw a line on the bottom of each foot to separate the toenail from the toe and add some small lines across the nail to create a slight glossy feel.

    Once you have completed this step, you can delete all remaining build lines.

    Step 13:

    Add texture and detail to your horse
    Using the same technique as in the previous step, add diagonal shadow lines all over your horse’s body and head. You want to follow the general shape of the horse and draw these texture lines in this direction. To make certain areas appear more muscular, add more diagonal lines to help them stand out. Add more texture in areas that you think will be darker, such as around the eyes, ears, under the head, under the feet, and on the horse’s belly.

    The amount of texture you add is a personal preference. Sometimes, less is better, because too much detail can become overwhelming and detract from the realism you’re trying to achieve.

    Step 14:

    Perfect your easy horse drawing
    In this last step of the drawing tutorial, you need to add some shadows to add stroke and make your drawing look more realistic. Using a dark gray or black color, add some light shadows around the areas where you added the extra texture detail in the last step. This shadow will help define the contours of the horse’s body. Shade along the horse’s belly, down the inside of the legs, under the head, along the nose and down the horse’s chest.

    When you’re satisfied with your shading level, you’re officially done with your horse drawing! You were patient enough to complete this complex drawing tutorial. Hope that you areFeel more confident in your drawing skills and we really hope that you are satisfied with your horse drawing.

     

    how to draw a realistic horse

  • How to draw a realistic eagle step by step – Pencil sketch of eagle

    How to draw a realistic eagle step by step – Pencil sketch of eagle

    How to draw a realistic eagle with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.

    How to draw a realistic eagle step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    STEP 1

    Mark the width and height of the image. Mark the general proportions of bald eagles. Draw an oval that will serve as the base shape for the bird’s head. Add a line through the center of its beak.

    STEP 2

    Outline the shape of the body. Draw guides for the body and a tail.

    STEP 3

    Draw the neck and wings of the bald eagle.

    STEP 4

    Add some lines to show a row of feathers on the wings, tail and center of the beak.

    STEP 5

    Sketch the beak shape; add some feathers to the wings and tail.

    STEP 6

    Work on whole shapes and shapes, adding more details. Pay special attention to the bald eagle’s eyes and legs.

    STEP 7

    Border, try to change the thickness and blackness of the line. Add some extra details like the ground or grass. Delete all instructions.

    How to draw a realistic eagle step by step

     

  • How to draw a realistic butterfly step by step – Easy drawing a realistic butterfly

    How to draw a realistic butterfly step by step – Easy drawing a realistic butterfly

    How to draw a realistic butterfly with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw a realistic butterfly step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1

    Draw the thorax and abdomen of the butterfly. This trick will center the butterfly in the center of your paper. The body is made up of the head (circle), the middle thorax (oval shape) and the abdomen (the elongated oval), 2 eyes (semicircles on either side of the head) and 2 antennae.

    Step 2

    Draw 2 curved lines from the top of the body part (on the sides). Try to make these lines of equal length and curvature.

    Step 3

    Draw 2 lines from the center of the body (on either side). Make the lines equal in length.

    Step 4

    Draw 2 curved lines from the bottom of the body (on the sides). Create lines of the same length and arch.

    Step 5

    Draw a squiggly line to connect the top of the wing to the center (horizontal) line. Do this for both sides of the wings

    Step 6

    Draw 2 diagonal lines from the end of the center line. Make sure they are the same length.

    Step 7

    Draw 2 half circles connecting the diagonals from the last step and the bottom arches. Your butterfly’s overall shape is now complete. Take a step back and make sure both sides look roughly equal. Take this opportunity to correct any areas that stand out.

    Step 8

    The markings and colors on butterfly wings vary by species. Colors and patterns help butterflies camouflage, protect, attract mates, and more. If you want inspiration for your butterfly art, check out this website that features images of over 50 species.

    Step 9

    Draw 7 lines in each wing quadrant (from teardrop to outer edge).

    Step 10

    Draw a bubble-like border around the outer edge of the wings

    Step 11

    Use your pencil to fill in the bordered area between the bubble border and the outer wing.

    Step 12

    Add some semicircles and “D” shapes for the top 3 parts of the wings. We will fill around them in the next step

    Step 13

    Color around the patterns you drew in the previous step (using a pencil). Also draw small circles along the top edges of the wings

    Step 14

    Thicken all lines between sections on both wings

    Step 15

    Fill in the body, and you’re done!

    How to draw a realistic butterfly

  • How to draw a realistic bee step by step – Easy drawing a realistic bee

    How to draw a realistic bee step by step – Easy drawing a realistic bee

    How to draw a realistic bee with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw a realistic bee step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1:

    Belly shaping
    When it comes to using a construction line, it’s always best to start with the largest part of the animal’s body. So, for our bee drawing, we’ll start by building the belly. For the abdomen, use a long and rather narrow oval to show this part of the bee. The oval should be diagonally angled and slightly off-center on your canvas as we will be drawing the rest of the bee to the left of this belly.
    The most important thing to consider in this first step is to make sure that there is plenty of space around this build step so that you don’t end up with a slightly flattened bee.

    Step 2:

    Draw your bee chest
    For the chest part of the bee, you will use a large circle. This circle should overlap slightly with the belly oval and its top should be slightly above the highest point of the abdomen.

    In terms of positioning, the chest circle should be in the center of your canvas.

    Step 3:

    Outline the shape of the head
    The first part of our bee drawing is long and narrow, so to create it we will use a small and narrow oval. The oval of the head should be slightly tilted towards the back of the canvas.

    Again, the oval of the head should slightly coincide with the roundness of the chest.

    Step 4:

    More bee proboscis
    Bees are the most important pollinators in our ecosystem and they do this by rubbing pollen while sucking nectar out of flowers. To suck up this sweet nectar, bees use their pointed proboscis, which is what we’ll be drawing in this step.

    Using a slightly curved “V” shape, attach the mouth to your bee drawing at the bottom point of the oval on top.

    Step 5:

    Sketch of a bee’s antennae
    As we continue to focus on the build, we’ll move on to laying out the basic shape of the bee’s whiskers. Using two simple curves, attach the antennae to the left side of the bee’s head, just below the midpoint.

    To capture a realistic view, the top antenna must start in an oval at the top and should be significantly longer than the other. The lower antenna can extend almost directly down from one side of the oval on the top and should be much shorter.

    Step 6:

    Sketch your bee wings
    For the wings of the bee, you will use two long ovals. Start with the upper wing significantly narrower than the other and must begin and end at the upper point of the chest circle. For the second wing, you can use a slightly larger and thicker oval that starts in the chest circle.

    The position and size of these two wings are essential to capture the true perspective of your simple bee drawing.

    Step 7:

    Lay the foundation of the front foot
    Bees, like most insects, have segmented legs like their segmented bodies. Start by drawing the front leg closest to us from our point of view. Start by drawing a sausage-like shape extending down from the chest circle just behind the intersection of the head and thorax. At the bottom of this sausage, draw another “S” shaped sausage that curves forward at the bottom.

    The second front leg is almost hidden behind the head, so we’ll just draw the curvier bottom protruding from the head oval just below the mouth.

    Step 8:

    Crafting the middle leg
    Bees, like other insects, have six legs, two in the front, two in the middle, and two in the back. Now it’s time to build the middle legs extending from the chest circle. Start with the middle leg closest to the front of the body and extend from the center of the bottom line of the chest circle. This leg is the furthest from our view, so it should look like the second front leg we drew in the previous step.

    For the larger of the two middle legs, you can use the same pattern as for the large front foot, but this foot should be slightly toward the back of the tarp.

    Step 9:

    Outline the hind legs
    The hind legs are the largest and begin inside the abdomen. Overlap the back belly draw both legs at an angle that join together at the base. The back leg should be much larger than all the other pins you’ve drawn so far and should end in a pointed curve.

    At the end of this step, your drawing should look like our example below.

    Step 10:

    Draw eyes for your bee
    The bee has very large eyes, only slightly smaller than the oval at the top. In the head oval, draw a slightly smaller oval, slightly more vertical than the head.

    Step 11:

    Pollen Ball Sketch
    To make our drawing of the bee as realistic as possible, we will draw a pollen ball. Pollen is usually concentrated on the large hind legs, so on the largest part of this leg, draw an angled oval.

    Step 12:

    Draw the final outline of your bee sketch
    Now that we’ve created our bee, we can use these lines to create the final outline of our simple bee drawing. For the most part, you can follow the construction lines closely. Start with beard, use c

    The road is built as the mid lane. You can then outline the bee’s head, making it a bit more pointed towards the mouth. When outlining the top and back of the bee’s head, use short feather strokes to give the impression of plumage, as bees have a soft appearance.

    You can continue to outline the rest of the bee’s body using these short hair lines. You can also create some sections on the chest and belly with this fur texture.

    Use smooth lines to create the shape of the wings and you can outline the belly with a straight line, bringing the bottom in a small spot. The legs should also be outlined with straight lines and you don’t need to draw along the segmented line but remember to make the lines narrower at these joints to maintain the segments.

    After completing this step, you are ready to delete any construction lines that are still visible.

    Step 13:

    Create textures and fur details
    In the last step before adding color, we will add fur textures and other details to our bee sketch. Start by using short lines to create a segmented texture for the wings. These freeline patterns are subject to the direction and angle of the wing. While you are working on the wing, you can add some small dots and blobs of color to the base of the wing to create more depth.

    Next, move up to your bee’s chest, using feather strokes to create texture. These feathers will extend outward from the base of the largest wing. Continue to fill the rest of the bee’s body with these lines, carefully following the shape of each segment.

    Once you get to the belly, you can start using these short lines to create signature striped patterns. For the head, the hair lines should extend into a few loops around the eyes. You can also add some more shadow to the beard and do the same for the legs. These areas on the legs will be painted black in our coloring steps. To finish off the detail drawing, add a few squiggly lines to the anther, creating a bumpy texture.

    Step 14:

    Spread the first layer of color paint
    For the base color paint, you will use a single layer of yellow to paint the entire body of the bee except for the wings.

    No matter what medium you’re using, make sure the base coat is smooth and consistent.

    Step 15:

    Coloring Bee Wings
    For the wings, we will use light beige as the background. Use a fine brush to create a smooth and consistent coating of color, making sure not to make it too dark.

    Step 16:

    Draw the details in black
    The second most prominent color in bees is black. In this step, take a black color and smooth brush, and color in the parts of the bee that are blackest.

    Add this shadow to the beard, eyes and legs.

    Step 17:

    Add dimension with shadows and highlights
    You can immediately see that there is a significant difference between the previous step and this step, but don’t be too surprised. This difference is because the shadow adds dimension and creates the right perspective. Start by using a bit of white paint and a soft brush to lighten the neck area that separates the bee’s head and thorax. You can do the same at the split between the chest and abdomen.

    While you’re using the white paint, add a bit of a lightly blended highlighter to the top of the bee’s eyes and create a very light “U” shaped reflection along the lower part of the bee’s curve. eye.

    Now is the time to focus on the darkness. Use a small but soft brush to add black shadows to the bristles around the bee’s head. Concentrate black specifically on parts of the head and body that would be naturally hidden from light, including the underside of the neck and just behind the highlight separating the head and thorax. As you move to the belly of the bee drawing, use the black shadow to create alternating black and yellow lines.

    To get the smoothest possible blend, dab your brush lightly on the canvas and gently apply it in place.

    Step 18:

    Add yellow highlights
    In this step we will use yellow and white to create some more highlights along the antennae and legs of your bee drawing. It’s up to you where you want to focus your light, but it’s best to consider where natural light will hit the bee and use that to guide your lighting choices. One place we recommend adding highlights is on the articulation areas between the leg segments. This prominent placement will emphasize the bifurcation of the bee’s legs.

    If you need some guidance on where to place your highlights, check out our example below for inspiration.

    Step 19:

    Mixing colors in wings
    To blend the color of the wings and make them appear more opaque, you would use a dark brown. Start by focusing a light dark brown color along the wing bones that are attached to the main body of the bee. You can then continue to blend this shadow gently into the wings, concentrating most of the shadow along the bottom edge of the largest wing and

    Make sure it gets brighter as you move up the wing.

    For the smaller wing, blend a darker shadow along the top segment as shown in our example below, again ensuring that the color blends into the lighter shade as you go up the wing.

     

    Step 20:

    More finishing steps
    The last step in this tutorial is optional, but it’s a lovely way to create a smooth and seamless bee drawing. You just want to remove all the contours in your bee artboard by filling them with the corresponding color of the area.

    How to draw a realistic beerealistic bee drawing simple

  • How To Draw a Baby Duck Step by Step – Easy drawing Baby Duck

    How To Draw a Baby Duck Step by Step – Easy drawing Baby Duck

    How To Draw a Baby Duck with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How To Draw a Baby Duck Step by Step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1

    Start by drawing a circle. This will form the duck’s head.

    Step 2

    Extend a long, curved line from the bottom of the circle to form the duckling’s neck, chest, and belly. Extend a shorter curved line from the circle to form the nape.

    Step 3

    Use a series of curved lines to outline the duckling’s wings. Notice how the top of the wing consists of a single curve, while the bottom of the wing is a scalloped pattern of connected “U” shaped lines. Also note that the wing is not fully enclosed where it attaches to the body.

    Step 4

    Detail the wing with a feather texture by drawing a series of connected “U” shaped lines. Then, draw the tail with a long curved line and a few short curves, completely enclosing the duck’s body.

    Step 5

    Draw the beak using curved lines. Notice the bulge at the tip of the beak and how the top and bottom of the beak overlap. Enclose a curved triangle on the lower part of the beak to indicate an open mouth.

    Step 6

    Delete the guide lines from the mine.

    Step 7

    Draw baby propeller. Use parallel curved lines to draw the legs, then outline a “W” shape at the bottom to enclose the toes. Draw a curved line between each toe to represent the membrane that helps the duck swim.

    Step 8

    Use curved lines to outline the remaining leg and foot. Notice the overlap of the lines at the flex of the ankle and the line separating the individual toes.

    Step 9

    Detail your duckling. Draw a small oval on the beak to indicate the nostril. Draw a large circle for the eye, with a small oval inside. Shade between the two sections and draw short curved lines on top of the eyes to represent the lashes. Draw a curved, pointed shape above the eyes for the eyebrows, and draw a plume of feathers on top of the head using a series of short curved lines that meet at sharp points. Remove guide lines as necessary. Finally, detail the body with hatches at the neck and side of the wings.

    Step 10

    Color your duck. Many are depicted in bright yellow, as in our example. However, ducklings can also be white, gray, brown, black, spotted or striped.

     

    how to draw a baby duck

  • How to draw Ankylosaurus step by step – Easy drawing Ankylosaurus

    How to draw Ankylosaurus step by step – Easy drawing Ankylosaurus

    How to draw Ankylosaurus with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw Ankylosaurus step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1.

    Draw head and body
    Draw a large oval for the body and a smaller circle for the head.

    Right now, it looks like a giant egg, but we’ll fix that. We will add the tail and footer on the next page.

    Step 2.

    Add tail and legs
    Add a thick and curved shape like pasta for the tail. Draw another rounded triangle to form the club at the end of the tail. Place two more shapes as shown to form the legs behind the body.

    Step 3.

    Draw legs
    The proximal legs of Ankylosaurus were formed by drawing one upper leg and one lower leg. These shapes will overlap slightly, as seen on the mesh. Make the bottom shapes bulge out at the bottom to form the feet.

    Our dinosaur is starting to take shape. We will add spikes and claws on the next page.

    Step 4.

    Extra Thorns and Claws
    Draw four teardrop shapes on each paw for claws. Add more tears along the tail for spikes.

    Step 5.

    Added face and armor
    Draw triangles along the side of the body to begin forming the upper armor. Add more triangles on top for spikes. Split head to separate mouth and lower jaw. Draw circles for the eyes and eye sockets. Place a teardrop shape near the front of the face to make the nostrils.

    Step 6.

    More armor
    Draw curves on the back and head of Ankylosaurus. This provides a grid to show how the armor spikes are arranged.

    This dinosaur needs more armor! We will continue our work on the next page.

    Step 7.

    Draw spikes on armor
    Draw the armor spikes by following the instructions of the grid. Add detailed lines on legs, belly and tail.

    Step 8.

    Add the final touches
    Trace the pencil lines you want to keep with a marker and erase any excess. Ankylosaurus is now ready to color.

    Your dinosaur is done! Even if you don’t get it right the first time, keep practicing until you’re satisfied with your drawing.

    Similar drawings for your reference

    how to draw ankylosaurus

  • How to draw Triceratops Dinosaur step by step – Easy drawing Triceratops Dinosaur

    How to draw Triceratops Dinosaur step by step – Easy drawing Triceratops Dinosaur

    How to draw Triceratops Dinosaur with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw Triceratops Dinosaur step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1.

    Draw the head, body and tail
    Draw a large potato shape for the body. Add curves that meet at a point to make the tail. Add a shape for the head and another curve below the head for the lower jaw.

    Step 2.

    Adding Peaks and Horns
    Complete the top shapes by adding horns: two long at the top of the head and one shorter at the tip of the snout. Connect the jaw to the body with a neckline. On the top of the head, draw a bumpy oval line for the crest.

    Step 3.

    Draw legs
    Draw a fat pear shape for the shoulders and upper leg, an upside down egg shape for the lower leg, and a shape for the feet. Outline a larger egg shape for the thighs, a rounded rectangle below for the shins, and a shape for the feet.

    Step 4.

    Add face and legs
    Draw a curve in front of the front foot for the lower front foot on the far side of the Triceratops and place a horizontal pear shape below it for the foot. Draw another line behind the hind leg for the shin and foot. Most of this leg will be hidden behind the torso and the legs are closer. Create a boomerang that overlaps the larger point for the eyebrow and draw an oval just below it for the eye. Add another oval below the front spike to make the nostrils. Draw two overlapping triangles at the end of the muzzle to make the beak. Complete the face with detailed lines around the mouth, nose and eyes.

    Step 5.

    More skin features
    Draw a line from the top of the head to the top of the crest. Add some wavy lines around the edge of the vertex for more detail. Add lines in the legs and tail to show the muscles. The lines on the neck and abdomen will show the folds in the skin. Don’t forget to draw toenails on the feet.

    Step 6.

    Add the final touches
    Draw on the pencil lines that you want to keep with a marker. Erase excess pencil lines and Triceratops is ready to color.

    how to draw triceratops dinosaur

  • How to draw a cartoon tiger step by step – Easy drawing a cute cartoon tiger

    How to draw a cartoon tiger step by step – Easy drawing a cute cartoon tiger

    How to draw a cartoon tiger with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

    How to draw a cartoon tiger step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1.

    Draw the head, body and tail
    Draw a bean shape for the body and a squat bell for the head. Add an S-shape for the tail. Next, we’ll give the tiger some legs.

    Step 2.

    Extra Legs and Ears
    Draw leg shapes on the near side of the body and add ovals for the ears and feet. Sketch a circle for the muzzle.

    Step 3.

    Drawing Legs and Muzzle
    Draw shapes for the legs on the other side of the body and add ovals for the feet. Put the muzzle in, add a triangular nose and a mouth shape.

    Step 4.

    Face drawing
    Draw ovals for the eyes and circles for the inner ears. Add details to the eyes and curves to the eyebrows, mouth and toes. Place in spots next to the nose for the beard. Add hair lines on the head, ears, chest and cheeks.

    Step 5.

    More stripes
    Draw stripes on the body, legs, tail and head. Your tiger is almost done — learn how to add a finishing touch on the next page.

    Step 6.

    Follow the last lines
    Use a marker to trace the lines you want to keep and erase the excess pencil lines.

    Next, bring your tiger to life by coloring it with vibrant orange and contrasting black as shown above.

    How to draw a cartoon tiger

  • How to draw a cartoon squirrel step by step – Easy drawing squirrel

    How to draw a cartoon squirrel step by step – Easy drawing squirrel

    How to draw a cartoon squirrel with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.

    How to draw a cartoon squirrel step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1

    Start by drawing an oval to outline the squirrel’s head.

    Step 2

    Below the oval, outline the jaw using a series of curved lines. Allow the lines to meet at jagged points, forming a fur shape.

    Step 3

    Connect the jaw to the oval using a short curved line. Outline the upper part of the jaw with a rounded “M” shaped line.

    Step 4

    Erase guide lines from the face.

    Step 5

    Outline the body of the squirrel using a long, curved line. Continue with a series of jagged curves connected at the bottom.

    Step 6

    Extend a short curved line from the head to form the neck. Continue with a long curved line to form the arms. Draw a series of curved lines parallel to this line, forming the opposite side of the arm.

    Step 7

    Use a series of curved lines, joined at jagged points, to roughly enclose a circle at the bottom of the shape. This forms the hip of the squirrel. Draw a curved line for the back, connecting the arms to the hips.

    Step 8

    Draw a curved line to indicate the hip on the opposite side, leaving a little stubble on the bottom.

    Step 9

    Draw a bun on top of the head using a series of long and short curved lines, allowing the lines to connect with sharp points.

    Step 10

    Draw the ears by extending a set of curved lines on each side of the hair. Allow lines to meet at rounded points.

    Step 11

    Erase the guide lines from the ears and hair.

    Step 12

    Draw a teardrop shape to form each eye. In the eye, draw a circle. Then draw a curved line through the bottom of the circle and two smaller circles near the top. Shade between small circles and lines. Draw a few short curved lines at the top of each eye to form the eyelashes.

    Step 13

    Draw an upside down, rounded, slightly irregular triangle to form the nose. Draw a wide, rounded “W” shaped line to form the top of the mouth. Place an irregular shape below the top of the “W” and draw a line down the center of the shape. This forms the squirrel’s large teeth. Draw a “U” shaped line to complete the mouth and use two curved lines to indicate the tongue.

    Step 14

    Give the squirrel an acorn. Draw a curved, rounded, narrow rectangle to form the acorn lid. Enclose a narrow cylinder above the cap to form the stem. Indicate the distal arm with a curved line. Draw the squirrel’s hand, using narrow “U” shaped lines to form the fingers. Finally, outline the shape of the acorn using two curved lines.

    Step 15

    Remove the guide lines from the acorn.

    Step 16

    Draw a curved line above each eye to indicate the eyebrows. Surround each foot with a series of curves, allowing the lines to overlap and form the toes.

    Step 17

    Begin the squirrel’s bushy tail by drawing a curved line from the hip to the face and another extending from one side of the head.

    Step 18

    Draw a series of curved lines to enclose the tail, some of which meet at jagged points. Notice how the lines at the tip of the tail overlap, forming an opening.

    Step 19

    Detail each ear using two curved lines. Extend curved lines from face to arms, arms to hips, and hips to tip of tail.

    Step 20

    Color your cartoon squirrel.

    Reference drawings

    How to draw a cartoon squirrel step by step

  • How To Draw A Cartoon Dragon step by step – Easy drawing Cartoon Dragon

    How To Draw A Cartoon Dragon step by step – Easy drawing Cartoon Dragon

    How To Draw A Cartoon Dragon with this how-to video and step-by-step drawing instructions. Cartoon drawing tutorials for beginners and everyone.

    How To Draw A Cartoon Dragon step by step

    Please see the drawing tutorial in the video below

    You can refer to the simple step-by-step drawing guide below

    Step 1

    Draw a large pear-shaped body. Sketch an oval for the muzzle. Above it, add a circular section for the head. Use two ovals to show the hands.

    Draw two long ovals for the feet. Sketch four curved lines for the legs. Add a comma-shaped tail.

    Step 2

    Use ovals (some parts) for the fingers and toes. To show part of the arm, use a long U and a J shape (both upside down). Attach a short line to a thumb.

    Draw an oval and two short curved lines for the mouth. For the nose, use two circular sections and two side Js. Add upside down V-shaped ears. Form U-shaped brow lines.

    Step 3

    Sketch a partial circle for the eyes. Draw curved lines inside the ear. Use comma shaped eyebrows. Create teardrop shaped nostrils. Outline the bottom and left and right sides of the jaw using short, curved lines.

    Form two long, curved lines down the belly and along the tail. Add claws using thick comma shapes and curved V shapes. End your left index finger with a short line.

    Step 4

    For the eyelids, use two check marks. Draw the pupil and iris using four lines. Connect the U-shapes along the back of the head. Place a curved line under these fins. Draw U-shaped teeth.

    Form the J-, U-, and W-shaped scales. Draw lines along the belly and tail. Connect the tail to your right leg with a line. Use two squiggly lines for the knees.

    Step 5

    Darken pupils, eyebrows and nostrils. Add shadow lines to the palm.

    Your dragon is done! Now you should be a little more confident with your drawing skills.

     

    how to draw a cartoon dragon