Tag: how to draw cherry blossoms

How to draw cherry blossoms step by step – Easy Cherry Blossom Coloring with Tiddly Inks Cherry Blossoms
How to draw cherry blossom with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below

Step 1
Start by drawing a single flower. To do so, draw a slightly indented “U” shaped line at the bottom of the “U”, Then draw more “U” shaped lines with indentations pointed in different directions . Allow connecting lines at the top of each “U”, forming a flower with five petals.
Step 2
Draw the second flower, partially obscured by the first flower. Again, use indented “U” shaped lines, allowing them to connect to form the outline of the flower.
Step 3
Draw a third flower above the others. Again, use concave bottom “U” shaped lines, joined together to enclose the shape of the flower.
Step 4
Draw a fourth flower, again using “U” shaped lines with a concave bottom. vag continue to draw more flowers like this
Step 5
Next, you’ll start connecting the flowers to a cherry branch. To draw the branch, extend a pair of parallel, roughly “S” lines between the two flowers. Notice the extrusion knots at the bends of the branch. Below the bottom set of flowers, extend another set of twists. Connect them at the end using a short curved line.
Step 6
Extend a short branch between the top flowers using two inverted “S” shaped curved lines. Connect the lines using a short curved line.
Step 7
Add subtle details to the branch. Place two sets of curves between the bottom flower and the branch. Extend three sets of curves from the tip of the stem to the top flower. Next to the flower, draw a “C” shaped line. Place a jagged shape inside it using some short curved lines that meet at “V” shaped points. This forms the base of an unopened flower bud.
Step 8
Using some curved lines, enclose the shape of the flower bud. Notice how the inner lines represent overlapping petals. Attach an irregular teardrop shape underneath the flower, indicating a fallen petal.
Step 9
Draw a small circle in each flower. Extend six short curved lines from each and end each with another small circle. This represents the anther and stamen of the flower. and create the face for the peach branch
Step 10
Color your sakura cherry blossoms. Most are pink, white or red.

March 30, 2023
How To Draw a Flower step by step || Easy drawing flower with pencil
How To Draw a Flower with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below

EdgarsArt
You can refer to the simple step-by-step drawing guide below
Step 1
Start by drawing a cone with a rounded bottom as if you were looking at the rose from an angle, so that you can see the top as well as the sides of the rose.
Step 2
In the center, draw the petals in a circle as shown in the image below, keep adding the petals but as you get closer to the outer corners of the rose the petals will become more rounded.
Step 3
You can see in the photos below the shape of the petals and how they are arranged.
Step 4
Now it’s time to draw the light bulb. However, keep in mind that we only see a small part of it, due to the angle from which we drew the rose.

October 7, 2022
How to draw pigeons and flowers step by step || how to draw a pigeon and rose flowers with pencil
How to draw pigeons and flowers with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below

Drawing Academy
You can refer to the simple step-by-step drawing guide below
Step 1
Start by drawing an irregular triangle to the sides to form the upper beak. Draw a similar shape just below the upper mine to create the lower beak.
Remember, the upper tip should be larger and more pointed than the lower beak, as shown in the illustration above.
Remember that the mine should be placed on the top left of your paper. To ensure this, create reference lines by drawing an intersecting horizontal and vertical line on your paper.
This tutorial will divide your paper into four rectangular blanks. The space in the upper left corner is where you should draw the beak.
Step 2
Draw a curved shape around the beak that we drew in the previous step. This outlines the head of the pigeon. When drawn correctly, the figure should look quite similar to a hook.
Since the pigeon faces to one side, the beak should be on the left edge of the pigeon’s head.
Step 3
Extend the lines of the head shape by drawing an uneven oval that connects directly to the head. This creates an outline of the pigeon’s body.
Remember, use light strokes when sketching. Avoid pressing down too hard with the pencil so you can easily erase any parts of the contour later that you don’t need.
Step 4
Draw a wide, U-shaped curve at the front of the bottom part of the pigeon’s body. Note that the U-shaped curve must have diagonal sides and a flat bottom. This forms the right leg of the pigeon.
Don’t forget to remove the border that overlaps the inside of the leg. This helps to keep the structure of the pigeon more delicate and most importantly keeps your drawing neat and orderly.
Step 5
Repeat the previous step on the opposite side of the pigeon’s lower body.
This forms the pigeon’s left leg, which is located at the back because the pigeon is facing to the side.
Step 6
Draw three oblongs connected with curved ends to create feathers.
These feathers must be joined together to form a rectangle on the pigeon’s lower back.
Step 7
Draw an oval with a slightly pointed bottom on the side of the pigeon’s body. Then draw diagonal lines at the bottom of the wings to create the illusion of feathers.
This also adds texture on the wing, making it look soft and realistic.
Don’t forget to erase any lines on the pigeon’s body that overlap the inside of its wings!
Step 8
Below the pigeon’s right foot, draw a paw with four claws.
This forms the pigeon’s right foot, as shown in the illustration above.
Step 9
Repeat the previous step underneath the opposite leg to create the left clawed foot. At this point, both legs of the pigeon are complete.
Then draw a circle at the top of the pigeon’s head, next to the beak. This outlines the dove’s eyes.
Then draw a smaller circle inside the eye to create the pupil. Finally, add shade to the entire eye while leaving the pupil unobscured.
After completing this step, your pigeon drawing should now be complete. All that’s missing is a range of colors to make your pigeon colorful
Step 10
For this tutorial on how to draw a Japanese flower, we will start with the first flower that will be attached to the branch on which the subsequent flowers will also be attached.
To draw this flower, we will draw five petals, and each petal will have a rounded square.
At the center of the flower there will be a small circle that will have lines extending from it. Each of these lines will have a smaller circle at the end.
Now that you’ve drawn this part of the flower, we’ll then draw some thin, angular shapes for the branch it’s attached to.
Then draw some curved leaves at the base
Step 11
Continuing with this Japanese flower drawing, next we will add some more flowers to the branch.
The first of these flowers will be on the left, and this flower will be drawn to closely resemble the first flower you drew.
Once we’ve finished painting, we’ll add another flower, but this one will look a little different. While the previous flower was opened, this one will be closed and facing to the right.
September 11, 2022
Flower design drawing with pencil | How to draw flowers step by step
Flower design drawing with pencil with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below

drawing kolors 36
You can refer to the simple step-by-step drawing guide below
Step 1
Start by using a series of curved, interconnected lines to outline the round center of the flower. Then use curved lines to outline three wavy petals.
Step 2
Complete the circuit of the five petals using wavy curves. Draw small lines inside the center of the flower to give it texture. Next, outline the petals of a nearby flower. For each petal, use a wavy curve.
Step 3
Draw another flower, this time from a different angle. Use a wavy line to draw a circular center between the petals drawn in the previous step. Use wavy curves to outline three additional petals around the center.
Extend curved lines from the center to indicate the anthers that carry pollen grains. Draw a small oval at the end of each other. Next to the flower, stretch two curved lines and let them meet at one point, forming a leaf.
Step 4
Use five “U” shaped lines to outline another flower above the first two. Draw more leaves below them. For each leaf, stretch two curved lines and let them meet at a point. Now, it’s starting to look like a flower garden!
Step 5
Draw an oval in the center of the chrysanthemum outlined in the last step. Then draw leaves next to and above it. For each leaf, stretch two curved lines and let them meet at a point.
Step 6
Turn some leaf-like shapes into the petals of another flower. Use a series of connected curves and a series of curves that meet at points to create its center and the rest of its petals. Then draw a stem with leaves extending above the flowers. Draw a long curved line for the trunk. For each leaf, stretch two curved lines and let them meet at a point.
Step 7
Draw more leaves at the top of the stem. Draw another stem with leaves in the bottom corner of the bouquet. Sketch another daisy using a series of “U” shaped lines for the petals and an oval for the center.
Step 8
Continue to lengthen the bottom body. Draw more leaves, and another flower with “U” shaped petals and rounded center.
Step 9
Extend the stem with the leaves still. Then bring the drawing to life by adding animated butterflies. These simple insects can be drawn using four “U” shaped lines, with the lines of the upper wings slightly larger than the lines of the lower wings.
Step 10
Color your beautiful cartoon pattern. Both flowers and butterflies come in a variety of colors, so get creative. Notice how we shaded the butterflies to show the narrow body and the patterns of the wings.

September 11, 2022
How to Paint a Tree with watercolor step by step
How to Paint a Tree with watercolor with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
Acrylic Painting Techniques
You can refer to the simple step-by-step drawing guide below
Step 1.
Start by painting the foliage of the right half using Olive green.
Step 2
Continue working with the foliage. Note that some white areas are retained on the paper. Paint from top to bottom and from right to left.
Step 3
For the left shadow, add a little Hooker’s Green and Cadmium Orange to the previous mix.
Step 4
Finish off the dark left side wet on wet, and with a few small punctuated strokes that suggest small shadows between the leaves.
Step 5
Continue painting the trunk with Sepia
Step 6
Paint the shade of the trunk with a mixture of Burnt sienna and Sepia
Step 7
Paint the trunk and add some branches below the foliage.
Step 8
Paint some branches between the leaves all over the tree. Finish the job by perfecting the form of the leaves on the left; then, add small green spots all over the top of the tree to represent areas of light and shadow.

September 11, 2022
How to draw a tree step by step || Easy Tree Drawing Easy for kids and Beginners
How to draw a tree with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below

You can refer to the simple step-by-step drawing guide below
Step 1
Draw the edge of the tree.
The leaves on the top of the tree can be painted any way you want. But this method is simple and quite beautiful. Draw a large oval with wavy lines that looks like a cloud.
Step 2
Draw the leaves inside.
Inside the outlined treetop, draw an unfinished shape also with wavy lines to indicate the inner foliage.
Step 3
Draw a tree trunk.
Draw two vertical lines to indicate the trunk of the future tree. Draw some small lines to indicate the bark.
Step 4
Draw the grass below.
Draw small grass at the foot of the tree. You can mark it with sharp lines in the form of small triangles.
Step 4
Color in the picture.
Usually the plant has a brown stem and green foliage. Paint the trunk brown and green on top. You also need to paint the grass underneath in bright green.
Step 5
Accomplished! All the steps have been taken and the drawing of the final tree has been done. Congratulations on your new paint masterpiece. Be sure to share your work with friends and family and add it to your drawing portfolio.
August 9, 2022
How to Draw A Cute Flowers Easy Step By Step
How to Draw A Cute Flowers with this how-to video and step-by-step drawing instructions. Easy drawing tutorial for beginners and kids.
Please see the drawing tutorial in the video below

You can refer to the simple step-by-step drawing guide below
Step 1:
To start drawing a simple rose, first doodle a teardrop-shaped egg, slightly tilted to the right.
Step 2:
As shown in the figure, draw a half U, starting from the left and connecting it to the bottom of the teardrop egg. Make the U slightly curved at the top.
Step 3:
Connect the U-head to the teardrop shape.
Step 4:
Add two small lines at the top to appear like the inner petals of the rose.
Step 5:
Now draw two more small petals at the top of the rose.
Step 6:
Drawing a rose is simply incomplete without its stem and leaves. In this step, draw two parallel vertical lines at the bottom of the anthurium. Make sure that the lines are drawn freely as they don’t have to be perfect.
Step 7:
Draw the leaves of the rose on either side of the stem and paint the flower at the bottom.
Step 8:
Your rose drawing is now ready. Bring the flower to life by coloring the rose with red or a color of your choice, as roses come in many shades. Color the stems and leaves with green.
December 10, 2021
How to Draw Cherry Blossoms Easy, Step by step
How to Draw Cherry Blossoms with this how-to video and step-by-step drawing instructions. Easy drawing tutorial for beginners and kids.
Please see the drawing tutorial in the video below

You can refer to the simple step-by-step drawing guide below
Step 1
To start planting cherry blossoms, we first need to draw a branch to attach.
Draw a few smaller branches extending from the branch on which we will later place the cherry blossom petals.
Step 2
On each stem, draw a circle that will be the center of the cherry blossoms. We will use these circles to help us draw the petals.
Step 3
Next, draw a small, slightly wavy oval that extends from the center shape to form a petal on the cherry blossom.
Step 4
Repeat the previous process until you have five petals around the center of your cherry blossom in the shape of a star.
Step 5
Now, keep doing this until all of your cherry blossoms have five petals.
Don’t worry about making your petals look too perfect. Making them slightly wavy and uneven will help preserve the look of the organic owner.
Step 6
Next, draw some thin lines from the center of the cherry blossom, with a small yellow ring at the end of each line.
Step 7
Repeat the previous step for each of your cherry blossoms, color them with a light pink and you’re done!

December 5, 2021
How to Draw a Tree Easy Step by Step for Beginners and kids
How to Draw a Tree with this how-to video and step-by-step drawing instructions. Easy drawing tutorial for beginners and kids.
Please see the drawing tutorial in the video below

You can refer to the simple step-by-step drawing guide below
Step 1:
First, in this step we will draw a dotted plus with the help of scale so you can erase it later.

Step 2
Thus, the tree whose trunk forms a line adjacent to step 1 forms the trunk of the tree as we know it at the bottom which is wider and narrower at the top.
Step 3:
Now it’s time to draw a small branch projection on the opposite side of the trunk’s slide. Common body in the lower part.
Step 4:
From the trunk draw 2 other branches going up in a direction wider than the projection and narrow at the end.

Step 5:
Let us draw 2 more branches below the 2nd pair of branches she drew, which is a tree with many branches. Draw as shown in the figure, going roughly parallel to each other and following the same pattern.

Step 6:
Perform small projections from every branch at random locations similar to the original tree.

Step 7:
Draw a bumpy tree outline around all the branches drawn in the steps above. It doesn’t have to be round or any other perfect shape as we know plants grow randomly in any shape.

Step 8:
Then add some details with clouds and earth to make it look more realistic and beautiful because trees are a part of nature.

November 25, 2021
How to Draw a Tree with Pencil Stepp by Step
How to Draw a Tree by Pencil with this how-to video and step-by-step drawing instructions. Tree Drawing for beginners and kids.
Please see the drawing tutorial in the video below
:
You can refer to the simple step-by-step drawing guide below
Step 1 – Create a Basic Line Outline
To start drawing the tree, you can simply draw a few lines to indicate the general direction of the trunk and some of its larger branches.
Step 2 – Draw the trunk & large branches
Now draw the actual shapes of the trunk and larger branches of the tree.
In general, stems and branches thin out as they move towards the top, so keep this in mind when drawing. You also want to add some pretty sharp bumps and twists here and there to make the branches look more natural.
Step 3- Draw smaller branches nhánh
You will need to add a few small branches to make the tree look natural. If you’re doing a fairly small drawing like the one in this example, you can draw the smallest branches with just one line each which can make things a little quicker and easier. Also note that while they bend in slightly different directions overall, the small branches tend to “fan out” around the tree, so paint accordingly.
Step 4 – Finish the drawing by applying shadows
Finally, you can shade the tree to make it look a little more realistic.
For this example, we’ll apply some very basic shadows that make the tree a little darker on the right side to show that light is coming from the top left of the figure.
You can add a little gradient to the larger branches and trunk. For the smaller branches, just try and color them slightly lighter on the left side of the figure and darker on the right.
Once you’ve completed the shading, you should have a complete drawing of a tree.
May 31, 2021
How to draw Cherry Blossoms Step by Step
How to draw Cherry Blossoms easy with this how-to video and step-by-step drawing instructions. Flower Drawing tutorial for beginners and kids.
Please see the drawing tutorial in the video below
:
You can refer to the simple step-by-step drawing guide below
Step 1
Start by drawing a single flower. To do so, draw a “U” shaped line with a little indent at the bottom of the “U”, Then draw more “U”-shaped lines with indents, pointed in other directions. together. Allow the seams at the end of each “U”, forming a flower with five petals.
Step 2
Draw a second flower, partially obscured by the first. Again, use concave “U”-shaped lines, allowing them to connect to form the floral outline.
Step 3
Draw a third flower on top of the other flowers. Again, use “U”-shaped lines with dented bases, connected to surround the flower’s shape.
Step 4
Draw the fourth flower, again using “U”-shaped lines with concave bases.
Step 5
Next, you will begin to connect the flowers to a cherry branch. To draw a branch, stretch a pair of parallel lines, almost like an “S” between the two flowers. Pay attention to node extrusion at the bends of the branch. Underneath the bottom set of flowers, extend another set of twists. Connect them at the end using a short, curve.
Step 6
Extend a short branch between the top flowers using two “S” shaped curves. opposite. Connect the lines with a short, curved line.
Step 7
Add subtle details to the branch. Place two sets of curves between the bottom flower and the branch. Spread three sets of curves from the tip of the branch to the top flower. Next to the flower, draw a “C” shaped line. Paste a jagged shape inside it using some short curves that meet at the “V”-shaped points. This forms the basis of an unopened flower bud.
Step 8
Using some curves, surround the shape of the flower bud. Notice how the inner lines show that the petals are overlapping. Surrounds an unusual water drop below the flower, showing a fallen petal.
Step 9
Draw a small circle inside each flower. Spread six short curves from each one and end each with another small circle. This represents the anther and stamens of the flower.
Step 10
Color your sakura cherry blossoms. Most are available in pink, white or red. Don’t forget to check out our other multicultural drawing tutorials, such as Japanese koi fish and simple mandala.

March 17, 2021