How to draw realistic locust with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1:
Draw the basic shape of the grasshopperWe want to start with a very light grasshopper sketch. We do this by drawing the general shapes of the head, thorax and abdomen of the grasshopper. First, we want to establish the general shape and shape of the insect.
The initial goal was to work with both a pencil and an eraser, gradually figuring out how the arrangement and proportions of the three main aspects of the grasshopper fit together. We will see that the thorax in the middle is about the same size as the locust’s head.
The abdomen will be the longest part of the grasshopper’s body, which will set the stage for how the hind legs and wings are placed on the grasshopper’s body. The chest can be quite square as it folds over the grasshopper’s body like armor. The abdomen has a torpedo-like structure, the end becomes pointed.
Step 2:
Fine-tune your Grasshopper sketchAs we continue to draw the grasshopper, we will continue to use the eraser and pencil, but now we will proceed to edit and change the drawing by defining the features of the grasshopper. Starting with the first part, we wanted to learn about the grasshopper, slowly refining the grasshopper sketch and adding more details.
A good suggestion is to look at a diagram of a grasshopper, which you can easily find on the internet. This way you can see how the different components of the grasshopper are put together. We wanted to make sure we went through each aspect of the grasshopper, slowly refining the details.
As you go from the head to the back of the abdomen, you want to consider how large the eye is placed in the head or how many breathing holes in the abdomen. Take your time with each section, slowly working with your eraser and pencil to capture the best details possible.
As for the two sets of forelimbs, both attach to the thorax and are smaller than the locust’s hind femur. The posterior femur is located more in the higher abdomen and is significantly larger. The front legs also spread out in a lateral fashion, helping the grasshopper stabilize. The hind legs move along the abdomen in a parallel fashion, arching upwards and then downwards.
The locust’s hind femur also has a symmetrical pattern that runs along the grasshopper’s legs. They can be drawn like a zebra flowing through the femur of a grasshopper. The locust’s abdomen has various twisting holes that give it a rib-like aesthetic in the locust’s abdomen.
There are two rows of these breathing holes, one that is above the abdomen and the other that runs below the abdomen.
A grasshopper’s wings grow from the locust’s shield-like feature that forms on the locust’s head. This is called the prothorax, and the wings ooze from this part of the locust and fall on the locust’s belly.
The wings will have a cracked glass-like aesthetic on their surface, giving them the unique spider web-like wing shape associated with insects. This can be drawn by creating fissures that run along the flow of the wing, giving it the natural insect look.
You want to make sure you go through each area of the grasshopper, from head to belly, slowly adding in the details. Make sure you add in as much detail as possible using the schematic locust reference guide to aid you in your drawing process.
The goal is for you to take your time, slowly drawing the grasshopper with a pencil to make sure all the details are placed correctly in the drawing. You also want to make sure that all the details make sense in terms of how they are placed side by side.
Step 3:
Add Color to Your Grasshopper
Grasshopper drawings can be colored in a variety of ways, but they are generally green with a small amount of different colored details. We can start with the head once our grasshopper sketch is complete, whereby we add a light green pencil shadow to the head area.
A good suggestion is to apply green, yellow and brown colors to the upper part of the grasshopper. We can also add small pattern marks around the face and jaw to give the grasshopper a more unique and natural look.
The way we make the grasshopper have a true color palette is also about how the colors are placed. This means we can mix and match colors to create gradients in our grasshopper drawing. We want to keep this in mind because we want to emphasize the different characteristics of grasshoppers.
See how grasshoppers increase in size using crayons for shading. You want to add light moments with your yellows and create transitions to shadows with darker colors like greens and browns.
Use black and brown pencils to create shadows around the different features of the grasshopper with its connection points and overlapping sections. This may have been the case with the joints, anterior thorax, and other areas where the locust fragments appeared to have been joined.
You want to emphasize different features of the grasshopper using color, which we do by mixing colors. Consider the belly: We can give dimension to the belly by creating a dark to light gradient in each belly spiral. With the grasshopper’s legs, we can start to be a little more playful with our palette.
Try to keep the look natural and organic, and make sure that the color placement is consistent. This means you want to keep the palettes symmetrically placed in a symmetrical pattern inside the femur.
The hind legs are divided into two main parts: the femur and the tibia. The tibia is the long part that goes down and places the grasshopper on the ground. This component of the grasshopper can also be colored and is usually orange or pink.
When you color the leg, the pattern of the femur can be colored as desired, although the pattern around the pattern should be yellow-green. The tibia may have a mixed pink/orange color.
Step 4:
Shading the head and chest with a pen
Once we add the pen mark, we’ll start with the head again. This should be approached with patience as we go through each part of the grasshopper. We can color the eyes completely with a black pen to create contrast. We can also use our pen to outline important features of the grasshopper.
We can also add lines as well as dots to give texture to the drawing.
We want to use our pen to shade the grasshopper. We want to add shadows around the chest and head area to create more dimension in the locust drawing.
Step 5:
Polish your legs and upper belly with a pen
As we added line work and shaded the pins, we wanted to look at the different joints and how the grasshopper connects together with its different characteristics. We want to shade each area of the grasshopper to give it a little more contrast and definition.
We can do this by painting over different parts with a pen or shading with our pen, we can also do this by adding lines or dots.
The point is to use the markers in any way to emphasize the features a bit more.
As we add pen marks around the upper abdomen area, we can outline the breathing holes and different separation areas in the body. When skimming the fuselage, we can also use the pen to run through the crack-like lines inside the wing to make these lines clearer.
Step 6:
Polish the wings, legs and lower belly with the pen
As we slowly worked out how to draw the grasshopper with our pen, we wanted to make sure we spent time on each section. This is especially true for the wings, as we want to be patient and delicate with the way we brush the pencil lines with our pen.
For the belly, we want to add a gradient from dark to light in each spiral. This means we’ll create a shaded and highlighted area, giving each spiral a bit more dimension. As you add some pen detail to the leg, you can add a small set of spikes along the tibia.
This gives the foot a more realistic quality, and the foot often has a set of spikes running along the tibia.
With the femur patterns, we wanted to use the shading pen strategically. We mainly want to lightly outline the colored pattern running along the femur. That way we emphasize the pattern and color of the legs.
You can also add small scratches and spots on the abdomen, which are an indication of texture and roughness on the grasshopper’s body. This shows that it is already working and interacting with the environment.
Take your time with your pen ball detailing in the grasshopper. Try to work for a while, slowly going through each aspect of the grasshopper. Let’s see how you can add pen marks to highlight different features.
Step 7:
Add Shadows to Grasshopper
Finally, we want to give the grasshopper a shadow to suggest a realistic interaction with the space around it. We do this by using our pencil to draw a shadow below the grasshopper along a flat plane.
horizontal. You want to make sure that the ball connects to each branch that is in contact with the surface.
Make sure you keep in mind that the shadow represents the grasshopper above it. This means that the width of the shadow will be distorted since the grasshopper is viewed from a different angle.
Once you’ve captured the grasshopper’s shadow with your pencil, you can proceed to light shading with your pen. And there you have it, a few easy steps on how to draw a grasshopper!