Category: How to draw step by step

How To Draw Yoda step by step | Easy drawing Yoda
How to draw Yoda with this how-to video and step-by-step drawing instructions. Cartoon drawing tutorials for beginners and everyone.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below

Step 1
Use circles and sticks to draw stick people. The head is very large, especially compared to the body. The chest and pelvis are the same width. As you can see, our stickman has
Step 2
Okay, if you’re sure you’ve drawn the stickman well, you can start this step. Let’s draw the outlines of the overlay. This vestment is a bit narrow around the waist (our right side only). Using smooth curves draw the feet. Don’t forget the wooden stick. It’s funny that Master Yoda can’t walk without a cane, but he can throw away the cane and kill a lot of clones or cyborgs if need be.
Step 3
This step will be really easy. Use the face lines from the previous step to draw facial features. As you can see, there are almond-shaped eyes and pointed ears that stick out horizontally.
Step 4
Ok, now you have actually prepared the sketch. Let’s detail it (in this step – the face). First delete the unnecessary lines from the previous step. Then draw the contours of the lips, eyes and lips. Don’t forget the lines inside the ear.
Step 5
Let’s draw our character’s wrinkles. The wrinkles on the forehead look like the spider webs on the Spider-Man mask. Don’t forget the wrinkles between the eyes.
Step 6
Now draw the folds of the fabric. When you look at the robes of the Jedi masters, you will see a large number of folds of fabric. Tht’s why we marked the lines in red that you should draw in this step.
Step 7
Continue drawing the outlines of the coat and the folds of the fabric. But first you should remove all remaining lines from stickmen and unnecessary lines from previous steps to get this:
Step 8
Ok, now we have really finished the picture. The final step is working with the shadows.

Pictures for your reference

March 22, 2023
How To Draw Batwoman step by step | Easy drawing a Batwoman
How to Draw Batwoman with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
The first part of the lesson will be very traditional, here we will draw Batgirl’s skeleton. Let’s start with the head, outline it as a simple oval, and the spine as a simple line. On this line outline the contours of the chest and pelvis. Using the lines we outline the arms and legs.
Step 2
The two intersecting lines on the head will help us draw the face. Next, the neck in the form of an oval, smoothly turns into the torso, narrows at the waist and widens at the hips. With the help of very simple geometric shapes, we outline the contours of the legs and arms. As you can understand, this step is necessary to add a little volume to the superhero figure.
Step 3
The third step of the lesson on how to draw Batgirl will also be very traditional, because here we will add the most basic details of the drawing. Let’s start with the head, outline the details of the face and mask. Next, we sketch the hair and a long cape on the back. We finish the step by sketching the logo on the chest and the details of the dress.
Step 4
Details of the drawing we will draw with very dark and clear lines. And traditionally, we start with the head, gently drawing the eyes, nose and mouth. Next, we draw the contours of the head and the mask. Now grab an eraser and erase all unnecessary instructions from Batgirl’s head.
Step 5
So let’s start drawing Batgirl’s body. To start, we draw the contour of the neck and long curly hair. Next, draw the contours of the body, taking into account all the curves of the body. On the chest, carefully trace the logo and draw the top of the cape over the superhero’s shoulders.
Step 6
Now the arms, will also be drawn with the help of clear and dark lines. Continuing the shoulder lines, we carefully draw the contours of the arms, considering all the muscles under the dress. Next, draw the outline of the fist and the details of the glove. Remove all unnecessary instructions from the superhero’s arms and move on to drawing the legs.
Step 7
In this step we will draw the superhero’s legs, but first, we will circle the lines of the long cape. Next, continue the body line and gently draw the hips and legs. In the same step, we draw muscle and knee joints on Batgirl’s leg and erase all unnecessary guides.
Step 8
In this tutorial, classic comic book shadows will be applied, which should be dark and contrasting. To draw such shadows, we first outline the outlines of the shadows, then simply paint them with solid black. To depict lighter shadows, we will use simple bloom.
March 22, 2023
How to Draw 3D Braille “A” step by step – Draw optical illusions
How to Draw 3D Braille “A” with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below

STEP 1
Start with a medium-sized sheet of white paper. Make sure it’s clean and not dirty. If it has pencil marks around, clean it up using an eraser. It will look something like this
STEP 2
Now draw a block letter ‘A’ (I drew the letter A but you can choose any letter you want). Make sure you don’t make the outline of the letter too dark. If you did, deleting it would be difficult. So use a light hand to do this. Once you’re done, it should look like this
STEP 3
Now draw some 3D lines to make the letter realistic. The letter casts a shadow on the ground. Therefore, draw lines long enough for you to draw its shadow more easily. Once you’re done, it should look like this
STEP 4
Now delete the remaining unnecessary lines. This will leave you with the 3D letter and its shadow. Make sure you draw the shadow exactly as you draw the block because you know, the shadow objects are the same size. After you are done deleting it will look like this
STEP 5
Now fill in the block. I mean lightly shading the parts to make it look realistic. Use very light hands to do so. Don’t mess it up. After you finish shading it should look like this
STEP 6
Now shade the block. I mean darken some parts to make it look attractive and realistic. Use heavy hands to do this. Once done, you will get this
STEP 7
Now use a marker and highlight the shadow. Make it pitch black. This is an easy task and I am sure you will do well. Once done, let the ink dry. You will get something like this
STEP 8
Now it’s time to use scissors. To make it completely accurate, you might want to draw some lines first like I did. But if you are an origami expert, you don’t need to draw straight lines. I drew lines like this to make it easier for me to cut
STEP 9
Now cut the paper along the lines. Be very careful in this part and don’t damage it. You can use a blade instead of a pair of scissors depending on your convenience. I used a pair of scissors. So it should look something like this

March 20, 2023
How to draw astronaut step by step | Easy drawing astronaut
How to draw astronaut with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
One of the most important parts of an astronaut’s suit is their helmet, as it allows them to see what they’re doing when performing different missions.
This is the part where we will start in this first step of our how to draw an astronaut tutorial. To start, we will draw the window in front of the mask.
This part of the window can be drawn as a rounded square, and then we will draw the rest of the helmet around it.
Use some more curves and then add some small whiskers to the top corners of the helmet.
Then finish with a small flat shape on top of the helmet. Once all these parts are drawn, we can move on to the second step of the tutorial.
Step 2
Now let’s draw the chest of the astronaut suit and add the details
The helmet outline of this astronaut drawing is complete, and now you can add some details to it along with the chest part of the spacesuit.
For the helmet, we’ll add some thin, curved shapes to the window to make it look a bit more reflective.
Then we’ll start the chest part of the suit. You can start by drawing a thin brim at the base of the helmet.
Then draw some curved lines going down from this rim to form a rounded square for the chest.
Accomplish this by drawing another square inside the chest and then adding some thin shapes to where the arms will be later.
Step 3
Draw my arms outstretched
For the next part of our tutorial on how to draw an astronaut, we will draw an astronaut’s arm.
The arms of the spacesuit are made up of several parts, as this gives them more flexibility. Sections will be small and square with thin, round shapes between sections.
At the end, you can draw a small circular part that goes over the wrist and then draw the attached fingers separately, as shown in the reference image.
Even the fingers will be separated into smaller sections so they can be bent more.
Step 4
Next, draw the starting point of his legs
Now we can start drawing this astronaut’s legs in this step. Like the other sections, the leg will be divided into several different sections.
Like the arms, these will be thin and rectangular with smaller circles in between them. Now we will draw up to the astronaut’s knee.
In the next step of the tutorial, we’ll finalize the legs and every last detail so you’re ready for this tutorial!
Step 5
Add final details to your astronaut drawing
You’re almost ready to have fun coloring, but first, we have some final details to add to this step of the astronaut drawing tutorial.
The main aspect will be perfecting the astronaut’s legs. To do this, add some rectangular sections below the knees.
Then use some circles for the top of his boots. The underside of the boot will be oval in shape with horizontal lines.
You can also add some simple line detail throughout the suit, then draw the bottom of the backpack underneath his arms.
Once this is done, you can then end up with your own details and ideas!
One idea is to draw the background, and if you can do that, you can design an amazing space background for the astronaut.
Would you choose such a wallpaper or create a new one of your own?
Step 6
Complete your astronaut drawing with color
This is the final step of this astronaut drawing and in this step you can finish your work with some color. In our reference image, we used a more realistic and deeper color palette.
We keep the colors mostly gray, and then we also incorporate some blues. You can choose the same colors, or you can change things up completely by using some unique colors!
Pictures for your reference
March 20, 2023
How to Draw a Sonic step by step – Sonic the Hedgehog
How to Draw a Sonic with this how-to video and step-by-step drawing instructions. Cartoon drawing tutorials for beginners and everyone.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below

Step 1
We start this easy Sonic drawing tutorial by drawing a circle.
Step 2
Draw spikes on the back of Sonic’s head. Do this by drawing six curved lines, one long and one short. Allows lines to connect in sharp points.
Step 3
Draw a smaller oval that overlaps the bottom of the head.
Step 4
Remove the guide lines from the oval.
Step 5
Draw Sonic’s ears, using two curved lines for each ear. Allow the lines to meet at sharp points, forming a triangle.
Step 6
Draw a small triangle in the near ear. Sonic’s head contour is ready.Draw two curved, parallel lines extending away from the body. Draw another curved line, duplicate it back, overlapping the torso.
Step 7
Erase the guide lines from the head and arms.
Step 8
Draw the legs extending down from the body, using two curved lines for each leg.
Step 9
Remove guide lines from the body.
Step 10
Draw an oval just outside the end of each arm. Add two spikes behind Sonic.
Step 11
Draw the hand rest between the arm and each oval. The left hand will consist of two curved lines forming closed figures. Note the “thumb up” of the left hand. The right hand consists of a small oval overlapping a larger oval and a curved line that partially encloses the oval.
Step 12
Erase the guide lines from the hand.
Step 13
Draw the fingers using a series of curved lines, connected in the large ovals of the hand.
Step 14
Erase the guide lines around the fingers.
Step 15
Draw socks at the bottom of the legs. Start by connecting the leg lines with a curved line. Then use a series of three different sized curves to enclose the shape of the socks.
Step 16
Extend a short, curved line down from the sock. Then draw a long, curved line from the other side of the sock to the short line. Draw two more curved lines on the shoe.
Step 17
Use two curved lines to form the left shoe, which meets at a point. Draw two more curved lines on the shoe.
Step 18
Using a curved line, enclose an oval on the torso. Draw a curved line starting from one side of the face, extending to the shoulders. Using curves, draw two partial ovals above the previous curve. Connect the partial ovals with a curved line.
Step 19
Next, we’ll finish off Sonic’s head and facial features.Draw and paint a small oval within each partial oval. Draw a curved line above each eye to make the eyebrows. Draw and shade another oval to form the nose.
Step 20
Complete your Sonic drawing by erasing a small oval area inside each eye and nose.
Step 21
Color your Sonic the Hedgehog drawing. He is traditionally dark green with a tanned face, belly, arms, and inner ears; red shoes; and white eyes, gloves and socks.
Pictures for your reference

March 20, 2023
How to Draw Shazam step by step | Easy drawing a Shazam
How to Draw Shazam with this how-to video and step-by-step drawing instructions. Cartoon drawing tutorials for beginners and everyone.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
Draw the outlines of Shazam’s head and body.
Describe a deformed oval-like shape and also add a curved line below it. How to draw shazam easily
Step 2
Describe the character’s facial expression.
Draw the eyes into ovals inside the outline of the head, and the nose and mouth into curved lines. How to draw full body shazam
Step 3
Add Shazam’s ears and hair.
On the right and left sides of the head, add curves and waves at the top of the head. How to draw realistic shazam
Step 4
Outline the lower limbs of the character.
Below the drawn outline of Shazam’s torso, draw two legs rotating in different directions. How to draw Shazam for kids
Step 5
Add Shazam’s hand.
On the right and left sides of the body, draw curved lines, as shown in the picture. How to draw Shazam for beginners
Step 6
Draw costumes and decorative elements.
Sketch the cape, draw the belt and the lightning bolt symbol on the front of the costume. how to draw a shazam for kindergarten
Step 7
Add some decorative elements.
Draw curved lines on the character’s arms and legs, adding a short line near Shazam’s arms. Shazam . drawing lessons
Step 8
Correct the inaccuracies.
Now you should use eraser to remove all unnecessary lines. Shazam drawing tutorial
Step 9
Color the picture.
To color Shazam use black, brown, beige, red and yellow.shazam drawing lesson
Pictures you can refer to

March 20, 2023
How to draw surreal eyes step by step
How to draw surreal eyes with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Sketch all the basic shapes. Then, with lighter strokes, mark the outline of the more prominent shadows that you can notice at this point.
I started with the student and continued adding shapes around it.
How to sketch eyes with a grid – proper order
Pupil
Iris
Light reflection
General outline of the eye
Inner corner elements
wrinkle
Waterline (eyelid contour)
Shadows and wrinkles are more prominent
eyebrow
The line connecting the outer corner to the eyebrow
Hover over the image or tap it to see the numbers.
Remember that the pupil and iris should be round. Be sure to look at them from a slightly different angle and see if they are more or less round. Another thing to keep in mind is that the pupil should be right in the center of the iris.
Now, for each eye there is a reflected point of light. Its shape is determined by a light source, such as a lamp or a window (in our case, a window). You often notice many highlights in your model’s eyes. I usually choose to ignore them – a bigger point is enough – it makes the eyes pop and keeps the drawing clean. You’ll get the best results if the reflection cuts into the pupil, so it’s half there and half on the iris.
As for the waterline lines, keep in mind that they get thinner as they get closer to the inner corner of the eye. The visibility of the upper water level depends on the angle at which we look at the eye.
Last but not least: be careful with lines that span multiple squares. After you have drawn the outline in each square, look at the entire line again and flatten it.
Pro Tip: When drawing with a grid, always remember to check what the grid made you do. Draw specific squares separately to ensure good proportions. Then look at the whole picture and check if the shapes look good, they connect smoothly and you don’t need to move things around a bit.
First, you may want to roll your kneaded eraser over the drawing a few times to make the sketch less visible. I leave it as it is so you can see it better.
The student’s shadow will determine the contrast of our drawing. Fill in properly with a soft pencil (at least 4B). Add layers until you achieve the closest shadow to black.
If the highlighter on your eyes gets into your pupils, keep that area white! It won’t be possible to remove it later without any graphite residue showing up.
Highlight Iris
In the next few steps I will show you how to draw an iris.
First, fill in the entire iris. Tilt your pencil slightly to keep the strokes soft, like on the right side of the image below.
Leave white reflected light. It’s the second factor that determines contrast. Make it the brightest element in your eye drawing.
Using a much darker color, define the outline of the iris. Make that line pretty thick.
If you are drawing another eye, where the eyelid covers part of the iris, leave that part as is.
MIX IRIS
Before blending, make sure you have erased the grid lines around the iris. We need that area clean as we will not only blend the inside but also the outer edge of the iris. If we don’t delete these lines, they will still be visible and trying to remove them later will destroy our perfect blend.
Use a blending stump to smooth the inside of the iris. I like to blend in the opposite direction of the pencil strokes. The truth is that I usually blend everywhere, so don’t think of that as a rule.
The final step here is to blur the dark circle on the outside of the iris that we created earlier. Use the tip of the stump to do it, keeping it slightly tilted.
Pro Tip: Using stump tips is the fastest way to damage them. However, I own a stump that is enough and I can damage it a little more. So you should.
First, dilute the dark circle towards the pupil. Then smooth the outer edge. If you look into any eye, you will notice that the line between the iris and the sclera is softer than sharp.
FILLING IRISE WITH SOME BASIC LINES
If your goal is to create a surreal eye drawing, the next 4 steps are crucial – we will draw a detailed iris.
If you feel like it’s too much, that’s okay. Even without these details, your drawing will look very impressive. All these odds and sods can also be superfluous if you’re creating a portrait or a whole person sketch where you won’t be able to see such small details. If so, please skip to step 9.
If not, draw a wiggly circle around the student. This ring usually separates different colors, shades, or structures in the iris.
Next, add a few more lines around the pupil. They should start right in the middle of the pupil and end at the edge of the iris (hover over the image). Make sure the spacing between them is uneven – the whole iris is quite messy and we wanted to make it as small as possible
First step here – delete the grid lines covering the top cover area. I didn’t and you can see them show up from below the graphite layer. It is often possible to blend them with the rest of the image, but sometimes they still show up. So don’t follow my example here. Erase hell out of them.
Next, refine the wrinkle – make it really dark and quite thick.
Fill in the whole area the way I did. Start at the inner corner and end at the line connecting the crease to the eyebrow. Remember to sharpen and tilt your pencil for that.
Looking at our reference photo, you’ll see that you should make the left side a bit darker. Same goes for the area above the brow crease. Please follow my sketch along with the shadows you can see in the original photo.
Let’s also start shading the folds. You should add a gradual shadow below the left fold and above the right fold. Look at the image to see where the conversion actually happens.
REGIONAL COOPERATION ON THE BILLION
Mix everything with the stump and brush if you have one.
Pro tip: Using a soft brush (preferably a makeup brush) can help you achieve better results than the original brush for blending, especially with light colors.
Go beyond the brow line a bit so that in the next steps you can smoothly transition between these areas.
Tweaking Shadows and Highlights
Just look at your drawing and decide if it needs more contrast. I added a drop shadow in the crease area (add a drop shadow under the fold on the right side and darken the rest of them)
I also use my blended eraser to highlight the top of my brows.
CHECK THE SPACE BETWEEN EYES AND EYES
Then, cover the entire area evenly.
Add another layer to darken the shadow next to the base of the nose.
CONNECTION TO THE UPPER COVER
This is the first part that actually contains the edge of our eye drawing. While mixing it, don’t forget to fade it to the left side.
Another thing to remember is to re-line the brow line.
Connect this skin to the skin that we drew earlier so that the shadow falls evenly across the entire upper eyelid.
ADDING LAYERS BELOW EYE
Again, delete unnecessary grid lines.
Add a few dots on the lower lash line so you can still see where it is, even after you blend the lower lash area. Don’t worry about their visibility – we’ll grow eyelashes from them later!
Fill in the remaining skin with gentle strokes. Continue adding layers in areas that need more shade. Play with some slashes here to ensure better coverage – change the direction of the strokes in each layer by 90 degrees.
MIX THE BOTTOM LINE
Mix everything. As always, start with lighter tones.
I used the brush to blend the white skin at the bottom of the artboard and the original for all the darker shades.
MORE DEVELOPMENT
As a rule, look at your eye drawing and see if you should enhance the contrast, aka darken the shadows.
You can also draw some wrinkles in this step. Use gentle strokes to create the most beautiful lines.
Smooths EVERYTHING
If you added new layers, use the stump to blend them into the rest of the artboard.
The transitions between skin shades should be subtle and soft, so stroke them with your brush. Take that same brush – you now have some graphite residue on it – and blend the edges of your drawing.
INTRODUCTION OUTSTANDING SKIN TEXTURE
This is another step that you can skip if you are creating a less realistic work. If so, go to step 30.
See all those little wrinkles at the corners of your eyes? It is drawing with the eraser again!
I used my eraser to do that – it’s super thin and does a great job with lines.
First, draw some lines and spots at the corner of the eye, then move to the skin on the lower eyelid.
This texture might look complicated, but I created it by simply swiping the area in one direction first and adding some random lines afterwards (preferably in the opposite direction). The goal is to create a pattern that looks like skin cells – a grid of small rhombuses and triangles.
While holding the eraser in hand, I also added some highlights around the waterline and on the eyeballs.
MORE FUTURE POP
Considering that all wrinkles and textures are indentations in the skin, you should combine each highlight with a dark area. Do it with a worn pencil or with the tip of a blended stump.
The light source is on the top right, so all tracks should have shadows on the top or right.
I’ve overlaid this image with the photo from the previous step to help you see the changes I’ve applied.
MORE tendons
While we’re looking at the details, let’s add some veins on the eyeball.
Draw a few irregular lines that vary in shade. They should be very thin, so use a fairly sharp pencil. Just don’t push it too hard. We wanted them to be subtle so as not to overshadow the iris. It’s drawing the eyes, not drawing the cardiovascular system, winking, winking.
March 16, 2023
How to Draw a Realistic Face step by step | Easy drawing face
How to Draw a Realistic Face with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
face sketch
Start your drawing by deciding how much paper you want the face to take up. Using a ruler, draw a horizontal line at the top and bottom of your paper with two vertical lines about an inch apart on either side. In the middle, draw another horizontal line. This will form a square in the center of your paper with three horizontal and vertical lines extending beyond it.
Start drawing a rounded curved line at the top of the page, bringing the two vertical curves down to the midline. Both of these should lie just outside the outside lines of the square. From these side lines, draw a slight curve on either side of the bottom of the page, below the center square, bringing the two together at the bottom horizontal line. This midsection should be a bit flatter to form the chin.
Step 2:
Add ears and hairline
Draw the top of the circle inside the original curve at the top of your page. This will create a hairline for you to work on later. From here, draw a lightly dotted line about a third of the way up from the center horizontal line to mark the guide line for the top of the ear.
Draw a curved line down each side of the face until about halfway down the bottom half of the drawing (down the middle of the cheeks). Inside each ear, draw a few ovals and lines to create the inner part of the ear.
Step 3
Mark the tutorial and start drawing eyes
On the middle horizontal line, draw five bright rectangles. Inside the second and fourth rectangles, draw an oval overlapping the midline. In each oval, draw a large circle and a small circle for the eyeballs, and a slightly curved line on each circle for the top of the eye. At the top of the guide rectangle, draw the eyebrows as a curved rectangle. Along the bottom of the guide rectangle, outline in curved lines to outline the nose with the tip resting on the bottom of the guide.
When you are learning how to draw a face, drawing the right eyes is one of the most important factors in making your drawing more realistic. Start by redrawing the circles of the eyeballs with a dark pencil to frame them before adding a lighter shade inside. After you’ve shaded the entire eyeball, erase a few small spots around the pupil to give the eyes a slightly glassy look. Add shine to the corners of your eyes to start creating a more three-dimensional look.
Take your pencil, shade around the outside of the eye around the oval and up to the bottom line of the eyebrows. Shade in different shades to create depth for the eyes. Once you’ve added this shadow, draw longer and shorter lines along the top and bottom of the eye to create the lashes.
To complete the eyes, paint very short lines in the curved rectangle of the eyebrows. Start with a much darker and darker shade at the inner corners, gradually lightening with pencil strokes as you move towards the outer edges. Since eyebrows are usually thicker near the nose, this makes your drawing more realistic.
Step 4
Complete the nose
Continue shading from the eye down along the center guide and the rough outline you created for the tip of the nose. Shade along the contours of the two small ovals for the nostrils. Start painting a slightly lighter shade as you move towards the center of the nose from the left side to create the shadow.
Repeat the shading on the right side of the nose and in the center, but make sure your pencil is lighter on the right than on the left to maintain the shadow you’ve created. You can also use an eraser to add a lighter line in the center of the nose to create a contrasting look with the shadows.
Step 5
Drawing in the lips
As you did with the nose, start redrawing the pale outline you drew earlier for the lips and teeth. Shade between the teeth with the darkest pencil you have on hand. With your next lightest pencil, start painting from the bottom of your upper lip and work your way up to the top of the lip, getting a little brighter as you shade.
Using different pencils will help you create the realistic look you’re after.
Using different pencils will help you create the realistic look you’re after.
For the lower lip, use a dark pencil to paint around the outer edges and fade as you move towards the center of the lip. You can use your eraser to help keep the center part brighter. Once the lips are completely shaded, draw short, bold lines from the center of the lips and move outwards to create the illusion of full lips.
Step 6
Finish the skin shadow
Start from the left side of the face and work from the outside to the center. This will help keep the shadow effect you started with on the left side of the nose. Use the darkest pencil to paint along the outer edge of the face, moving lighter as you get closer to the underside of the center of the eye. Keep the shade here until you start to reach for the existing shadow next to the nose.
Brush up to the forehead, keeping the shade bright as you move up to the outer edge above the left eyebrow. As you shade towards the hairline in the top center of your face, keep your pencil as light as possible. The middle and right part of the forehead should be some of your brightest colors to bring out the shadows that fall down the left side of the face.
Continue buffing lightly across the right side of the face, adding a little darker shade just below the center of the bottom lip. As you move up the neck, shade from left to right, keeping the shadow for about 3/4 of the neck with a small triangle of lighter shade on the right. Finally, cover the insides of the ears on both sides in both light and dark patterns to reflect where the light comes naturally.
Step 7
Add hair to your face drawing
Finally, draw individual curves from the center of the top of the head curving down around one side of the face. The lines should be darker in the center and lighter, before darkening again along the left side of the face.You will repeat this on the right side of the face with a lighter color, drawing lines around the edges of the shoulders and face to complete your drawing.

March 16, 2023
How To Draw Paper Mario step by step
How To Draw Paper Mario with this how-to video and step-by-step drawing instructions. Cartoon drawing tutorials for beginners and everyone.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
Draw a circle near the top as a guide for Mario’s head. First, draw four small marks for the height and width of the circle, then connect the marks with curved lines. Make a light sketch at first to make it easier to erase if you make a mistake. But circles are not necessarily perfect. It is only a guide. If you want a perfectly round shape, trace the outline of a glass, mug, or anything else that’s round.
Step 2
Draw two intersecting lines inside the circle, one horizontal and one vertical. Curve the lines to contour the head. The vertical line should deviate slightly to the right from the center of the circle. The horizontal line should be slightly lower than the middle. These building lines will help you place Mario’s facial features later on.
Step 3
On the left side of the head, draw a C-shaped line to guide Mario’s ears.
Step 4
Draw another circle under the head to guide Mario’s body. This circle should be the same size as the circle for the head. Draw this circle slightly to the right of the head. Don’t draw it directly below. A very small portion of the circle at the top should be at the back of the head.
Step 5
Draw a small circle on the left side of the body to serve as a guide for Mario’s first hand. Pay attention to the size of this circle in relation to the circle for the body. It should be about one-fifth the size. Draw two curved lines connecting the small circle to the torso to form the guide for the first arm.
Step 6
Draw another small circle on the top, right side of the head to serve as a guide for the other hand. This circle should be the same size as the other small circle on the left side of the body. Draw two curved lines, one short and one long, connecting the circle to the body to form the guide for Mario’s other arm.
Step 7
Draw another small circle below the body on the left side to serve as a guide for Mario’s first paw. This circle should be slightly larger than the circle of the hand. Now, draw an arc above the circle and inside the body, as a guide for the rest of the legs. Mark the height of the arc with a small line, then add curved lines on the sides.
Step 8
Draw another circle below the previous one to serve as a guide for the other foot. This circle and the previous circle must be the same size. They should form a type 8 under the body. Draw a long line at the top, right side that connects to the body to form a guide for Mario’s other leg.
Step 9
Draw a long, thin shape near the top of the head for the bill on Mario’s hat. The shape is basically made up of two long parallel lines connected on either side by small arcs. The bill should be close to the top edge of the circle. It should be slightly inclined like a horizontal construction line.
Step 10
Under the hat, draw a few curved shapes as a guide for the eyebrows. Mario’s eyebrows are basically two short, overlapping curves. Do not overlap the brow lines with the lines for the bill of the hat. Eyebrows should be on the back of the bill. Use the vertical construction line as a guide to help you determine the distance between the brows.
Step 11
Draw a curved line in the lower half of the head for Mario’s big nose. Use construction lines as a guide for placement. Sketch lightly at first to get the right shape. The end result should be similar to a wide circle or oval without the top left edge.
Step 12
Draw a long oval under each eyebrow for Mario’s eyes. Sketch lightly at first. Only darken the lines when you put the correct position and shape. The top part of the oval should be behind the eyebrows. The lower part of the right eye should be behind the nose.
Step 13
Inside each eye, draw a smaller oval for the iris. Draw the iris close to the left edge of the eye. The right iris is basically made up of a curved line. Inside each iris, draw an even smaller and thinner oval for Mario’s pupils. Try to draw the pupil right in the center of the iris. Shade the pupils except for a small circle at the top of each pupil to represent glare.
Step 14
Draw Mario’s mustache under his nose using a series of curved lines. First, draw a short line on either side of the nose to define the length of the mustache. Then connect the lines with a row of short curved lines for the bottom part of the mustache. The right curves should be partially hidden by the nose. You will have a total of six small curves that make up Mario’s mustache.
Step 15
Draw Mario’s mouth below the mustache using a series of curved lines. First draw a U-shaped line for the open mouth. Then add a smaller line inside for the tongue. Draw a smaller curved line outside of the mouth on the lower, right side for the bottom lip.
Step 16
Draw a long curved line above the head for the top part of Mario’s hat. First draw a short line above the head to indicate how high the top of the hat will be. Then draw long curved lines on the sides that connect from the sides of the head to the top mark. The line should generally start on the left side above the ear, curve up and to the right and end on the tip of the bill.
Step 17
Draw a curved line right on top of the bill, near the center, for the first part of the logo on Mario’s hat. The shape should be similar to an oval with the bottom part missing.
Step 18
Draw the letter M inside the shape to finish the logo on Mario’s hat. To make the letter M bold, first draw a regular letter M with a short horizontal line on each “leg.” Then draw a smaller letter M under it to make the shape thick and bold.
Step 19
Use the initial circle as a guide to draw the shape of Mario’s face. Follow the basic path of the edge of the circle but draw the line closer to the eye , then curve out again to create the cheek. Sketch lightly at first, and when you get the shape right, darken the lines. Draw an extra curved line under the bottom lip for the chin. Draw the lower, left side of the face but don’t darken the line above the ear.
Step 20
Draw the sideburn under the hat’s bill and next to the ear. The sideburn should go down a bit below the horizontal construction line. The shape is made up of two vertical lines with two short curved lines at the bottom. Draw a line on the right side for the visible portion of Mario’s other sideburn.
Step 21
Darken the C-shaped line on the left to create Mario’s ear. Draw a wavy line similar to the letter 3 inside the ear for the inner strcuture. Add a short line on the right side for the visible portion of the other ear.
Step 22
Use the small circle to the left of the body as a guide to draw Mario’s first hand. First lightly draw a diagonal line across the circle to indicate where the folded fingers will be to form a fist. On the top right edge of the initial circle, draw a curved line for the thumb. Now draw the folded fingers as curved lines up against the diagonal line. The arcs that form the folded fingers should get smaller the lower they are. Follow the basic path of the initial circle and draw a wavy line on the left side to form the knuckles.
Step 23
Draw a curved line within the shape of the initial circle to create the rest of Mario’s hand. This line should go from the thumb to the lowermost folded finger. Add a small line inside for a crease. Darken the initial curved lines on the right to create the shape of the arm.
Step 24
Use the small circle at the top as a guide to draw Mario’s other hand. Draw the thumb on the top, left side as a small circle-like shape. Lightly draw a diagonal line across the circle to indicate where the folded fingers will go. Now draw a series of curved lines up against the diagonal line to form the folded fingers. The pinky should be the smallest finger and the only one that’s not hidden.
Step 25
Follow the edge of the initial circle as you draw a wavy line at the top to create the knuckles. Continue following the path of the circle and add the opening of Mario’s glove at the bottom. Use a couple of curved lines to draw the left side of the palm and the crease inside. Darken the guide lines below the hand to create the shape of the arm.
Step 26
Draw the overalls’ suspenders under Mario’s head using a few lines and circles. First draw a line that goes from the shoulder on the left to the guide for the leg. Then draw a small circle above the guide for the leg as the fastener. Add another line on the left for the other side of the suspender.
Draw the same shape on the upper, right side of the body for Mario’s other suspender. The shape of the suspender is similar to a very long letter U that’s tilted to the left. Draw a small circle at the bottom of the shape for the suspender’s fastener.
Step 27
Use the shapes on the lower, left side of the body as guides to draw the first leg. Darken the arc to create the shape of Mario’s knee and leg. Darken the top half of the circle to create the pants cuff and front of the shoe. Draw two curved, parallel lines across the circle to create the bottom edge of the shoe. Darken the bottom half of the initial circle but make the shape
Color your Mario drawings with crayons, markers or even crayons! Use dark red or light brown to create shadows on the sides of the hat and shirt. Then use red on top. You can also omit the shadow and just use red for a simpler drawing.
March 16, 2023
How to draw King Kong step by step | Easy drawing a King Kong
How to draw King Kong with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
Start sketching King Kong by drawing the ape’s face. Use curved lines to trace the circles of the eyebrows, nostrils, and mouth openings. Use additional curves to contour above the eyebrows, enclose the eyes and pupils, contour the nostrils, and outline the teeth along the upper jaw.
Step 2
Sketch the first part of your King Kong cartoon. Use curved lines to outline the head and shoulders, the tongue, the side of the mouth open, the teeth along the lower jaw, the furry jawline, and the ears.
Step 3
Draw the chest and muscular belly of the animal. Use curved lines to outline the chest muscles and the sides of the abs. Connect the lines at the bottom with a series of short lines that meet at jagged points, indicating fur. Contour the muscles by drawing straight lines down the center of the torso.
Step 4
Draw the giant ape’s arm. Use curved lines to outline the upper arm, lower arm, and curved fingers. At the elbows and wrists, use a series of lines that meet at jagged points to create the look of fur.
Step 5
Draw the remaining arm, erasing as needed. Again, use curved lines to outline the upper arm, lower arm, and curved fingers. At the elbows and wrists, use a series of lines that meet at jagged points to create the look of fur.
Step 6
Draw the sides and bottom of the body using curved lines.
Step 7
Draw legs. Use overlapping curves to outline the edges of the legs. Connect them at the ankle using a series of curved lines that meet at jagged points.
Step 8
Draw the other leg. Again, use overlapping curves to outline the edges of the legs. Connect them at the ankle using a series of curved lines that meet at jagged points. Knee contour with short lines arranged in an open circle.
Step 9
Complete your King Kong sketch by drawing his feet and toes. Use overlapping curves to outline the toes and place a pedicure at the tip of each toe.
Step 10
Color your cartoon about King Kong. We’ve painted it black and gray, the typical colors of the silverback gorilla.

March 16, 2023
How to draw Op Art step by step | Draw optical illusions
How to draw Op Art with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Creating a successful Op Art work requires careful planning and attention to detail. Here’s a step-by-step guide to get you started:
Step 1
Choose the right vehicle
The first step in creating an Op Art work is choosing the right medium. Depending on the effect you want to create, you can choose between traditional media like drawing and painting or digital media like vector graphics and 3D software. You can even decide to combine different means to achieve the desired result.
Step 2
Create a basic design
Once you’ve chosen the right medium, it’s time to start sketching a basic design. Start with a simple idea and then build on it. Think about the colors, shapes, and textures you want to incorporate. You can also look to nature for inspiration or take cues from existing Op Art works. Once you’re satisfied with your basic design, move on to the next step.
Step 3
More colors and shapes
Now it’s time to start adding colors and shapes to your design. Consider how different colors and shapes will interact with each other and how they will contribute to the overall effect. Experiment with different combinations until you find one that works for you. Pay special attention to the balance between light and dark colors, as well as the contrast between the shapes.

March 15, 2023
How to draw a Robocop step by step | Easy drawing a Robocop
How to draw a Robocop with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
Start by creating an egg shape to contour the RoboCop’s head. Sketch the guidelines for the face as well as for the mask. and a well-proportioned body with straight arms and legs shoulder-width apart with sturdy cables.
Step 2
Determine the shape of the head and face just by going through the instructions you just made.
Step 3
Next, outline the marker line that frames the lower part of the RoboCop face. This is from the helmet or the mesh under the helmet.
Step 4
Next, draw the outline from the helmet that covers his entire head, leaving only his mouth and some of his cheeks. Add detail on the side of the head or mask.
Step 5
Sketch the lines around the mouth from the nose under the helmet, then outline the RoboCop’s lips or mouth. You will then add details to the face for more texture and to create expression. Once that’s done, you can draw the shape of the neck, along with the muscular shoulders.
Step 6
Next draw the body in the same detail, for more accuracy please review the instructions. and finally remove errors and instructions.
This is the finished product when you finish your drawing or sketch. You may want to color this artboard to bring RoboCop to life or add some shadows.
Sketches you can refer to
March 15, 2023
How to draw Triceratops Baby Dinosaur step by step | Easy drawing Dinosaur
How to draw Triceratops Baby Dinosaur with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
Start with a curved triangle on the left side of the page. Add an elongated S shape at the top and a short curved line at the bottom.
For the eye, sketch a downward curved line, draw a larger curved line underneath and connect the shape to a straight line. Draw a circle inside the eye and add curves around the eye to create depth.
Step 2
Make a large curved triangle for the top horn. Below the front horn, draw another large triangle facing downwards, then draw a curved line for the lower jaw.
Add more curves to complete the mine. Sketch a circle for the nostrils and draw two more curved lines on the face.
Step 3
For the left horn, draw a long triangle resembling a tentacle. Add lines inside the horn and curves below.
Start drawing a tall heart shape above the head and draw rounded triangles above and behind this shape like chewing gum.
Step 4
Finish the heart shape loosely and add more gum. Sketch two large hooks inside the figure.
Step 5
Start the right foot with an arrow pointing to the right, then draw a parallel arrow. Use two curved lines for the underside of the body. Sketch a few more curves around the head.
Step 6
Make three ovals like Easter eggs for the toes. Use loose, irregular lines to draw the hind legs, then add a V above the first line to make the legs round like a chicken thigh.
Step 7
Use rounded triangles for the toes on the back foot. Start the left foot forward with an uneven line.
Step 8
Draw three more easter egg shapes for the toes, then complete the leg section with a curved line that connects to the torso. Draw a corner line pointing to the right to start the final leg.
Step 9
For the back, create a curving curve that ends with a loose point for the tail, then release it into a deep curve that connects to the torso. Complete the final leg with three overlapping toes and a few short runs.
Step 10
Complete your three-horned cartoon by outlining the entire drawing with a black pen or marker. Erase loose pencil lines. For a realistic look, color your cartoon tricorn with a light green color. Use a darker blue for the shadows and a lighter white for the horns, toes, and beak. Add a lighter green to the highlights to show the sunlight hitting the dinosaur’s skin.
Pictures for your reference

March 15, 2023
How to draw a peregrine falcon step by step | Easy drawing a peregrine falcon
How To Draw A Peregrine Falcon with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.

Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
If you’re looking for falcon drawings and sketches for kids to make at home, you’re at the right place! Keep your learning spirit alive with our curated falcon sketch & drawing list like How to Draw Falcon, Drawing falcon, easy falcon drawing, falcon drawing tutorial, drawing falcon step by step and peregrine falcon sketch art and more
How to Draw a Peregrine Falcon: All Steps
In today’s article, we will learn how to draw a falcon on paper. The position and scale of each part will be marked in each step of the guide. Note that the blue outlines are used to indicate the current sections being drawn in each step.
Step 1
Create a bird body
Using your pencil, draw a small inverted teardrop shape in the center of your paper. See reference drawings for instructions.
Step 2
Add Neck & Head
Add a small circle on the left side; that would be the head of a falcon. Then draw curved lines that will join the body as the neck.
Step 3
Draw the beak and the eyes
The next step is to draw the beak on the bottom left of the bird’s head and the eye in the middle.
Step 4
Add left wing
The wings are shaped like a giant feather. Follow the demonstration on how it will look.
Step 5
Add right wing
The falcon’s right wing appears to be larger than the left wing due to its angle of view; the right wing is closer to us! Please add details for the feathers.
Step 6
Draw the tail
Having completed the wing, we can now draw the tail below the right wing.
Step 7
Add left foot
Before we finish drawing the line, we must first add the left foot below the body. Falcons have powerful claws to grab their prey.
Step 8
Draw right foot
Just copy the lines for the left foot but it should be drawn slightly behind the left foot and you are done.
Step 9
Finish your drawing
We can now color our falcon drawing with shades of blue, light yellow and orange.
March 15, 2023
How to Draw the Rocket Launcher step by step | Easy drawing B41
How to Draw the Rocket Launcher with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
I don’t know what the names of the rocket launcher parts are, but I’ll do my best to convey the object you’re drawing. Start with the barrel of the launcher like that. This is a thin, narrow tube from which the grenade is blown.
Step 2
Now you will draw the actual structure for such a rocket launcher. Along with this design you will need to draw a pistol grip.
Step 3
Next, add details to the handle, then draw another handle for the launcher. After all, you need two hands to operate this machine.
Step 4
All you have to do here is draw both the front and rear sight along with the trigger.
Step 5
At one end of the rocket launcher, all you have to pull out is the slender cone-shaped grenade.
Step 6
Add definition lines for such a grenade, followed by details for either the handle or grip, then the metal design on the barrel.
Step 7
Next and last, all you have to do is draw the rest of the rocket launcher design. As you can see the right end tapers out like a horn. Erase your mistakes and instructions.
Step 8
In the end, your drawing should look like the one you see here. Color in this rocket launcher and if you like, you can show off your creation.
Drawings of other guns that you can refer to
March 15, 2023
How to draw Sniper Rifle step by step
How to draw Sniper Rifle with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
At first, sketch a long stick, which later becomes the barrel of our sniper rifle.
Step 2
Continue drawing sniper rifles. Now we draw the forest and the bipod.
Step 3
Now draw the telescope at the top and the outlines of the stock.
Step 4
Draw safety trigger, detail on the view and contour of the stock.
Step 5
Remove all unnecessary instructions from the sniper rifle and add the final details.
Step 6
To make the drawing of a sniper rifle more realistic, add shadows using hatches.
It’s a lesson on how to draw a sniper rifle step by step. want.
Pictures of other guns you can refer to
March 15, 2023
Easy to draw cute dog | How to draw cute dog step by step
Easy to draw cute dog with this how-to video and step-by-step drawing instructions. How to draw animals for beginners and everyone.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
To start this tutorial on how to draw a puppy, we will start with your puppy’s face. Using the reference image as a guide, carefully draw a line with some curves in it.
The top of the head should be round with a much longer curve to the right. After you are satisfied with the look of this step.
Step 2
Now draw a first ear for your puppy
Now that you have started drawing the puppy’s head, we can add ears to your puppy.
This puppy will have some soft, pig ears that can fold down on their own. Our left ear will be completely folded, so you won’t be able to see the inner ear of this ear.
This will be created with another very curved line that can fold on its own.
Step 3
Next, add the other ear
We will add the other ear in this next step. This one will also be folded and with the angle of this ear, you will be able to see a bit of the inner ear.
You can use the reference image in our tutorial to add another line that has the same curve as the previous one.
Step 4
Give your puppy a cute face
The head and ears are done at this stage in the how to draw a puppy tutorial, so now we are going to add a cute face to your puppy. There are a few factors to face, so we’ll take it one step at a time.
Starting with the eyes, we will make them big and round to make them look cuter. They will be made up of some very curved lines for the border with some circles inside.
Mentioning reference images helps a lot so they look like examples. They will have some short curves on top to look like some cute lashes to them.
You can also use some simpler circles with dots inside for a less detailed look if you like!
Once you’ve finished drawing the eyes, you can draw the cute little nose. The lower mouth will be very curved with the mouth and tongue open. Once you’ve completed the face, it’s time to do step 6!
Step 5
Now we will draw the back and the tail
For step 5 of this puppy drawing tutorial, we will be using another curved line going down from the head to form your puppy’s back.
You can then draw a small but curved tail to show that your cute pup is feeling happy!
Step 6
Draw some legs for your puppy
Draw your puppy sitting comfortably on the floor, and we will show how he is sitting by drawing some legs for him in this step.
The front legs will be much straighter and they will extend with one leg from below the head and the other from the chest down.
You can then draw some cute paws at their ends as they appear in the image.
The legs at the back will be much more rounded to show that the puppy is sitting comfortably.
Step 7
Let’s add some final details
You’re pretty much done with your puppy drawing now, but it could still use some final details!
We’ll show you an idea of some details you can draw, but don’t be afraid to draw some patterns or other details you like!
For details, we drew a circle around the eyes as well as one on the back to give the dog character. Will you go with these or will you add some of your own?
Step 8
Now finish it with some color
This puppy drawing tutorial is over, but before you finish your puppy you need one more thing: some pretty colors!
Drawing when coloring
March 14, 2023
How to draw Caterpillar Rainbow Easy | Draw Caterpillar Rainbow step by step
How to draw Caterpillar Rainbow with this how-to video and step-by-step drawing instructions. Easy animals to draw for beginners and kids.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1:
To start drawing you can start with a circle, it doesn’t have to be perfect, always try to draw freely rather than using some tools. Below the drawn circle, draw a half circle on the edge of the circle, then draw a third curve below these shapes.
Step 2:
As we did in the first step, continue to draw another curved semicircle shape by shape, but be aware that the shapes will get smaller as you move towards the tail. Draw a total of 6 shapes, you can draw a few more but don’t increase it too much.
Step 3:
Once you have completed the body, draw an antenna on the top of the head, draw 2 lines and a circle on the top of the head. Draw a small triangle at the 2nd, 3rd and 4th bottoms, the curve is drawn for the chest and abdomen.
Step 4:
Draw 2 big round eyes in the largest circle, draw 2 eyebrows above and a smiley mouth below the eyes.
Step 5:
Add green to your drawing and a smiling cartoon swallow is ready.

March 14, 2023
How to draw a sofa step by step | Sofa Drawing Easy
How to draw a sofa with this how-to video and step-by-step drawing instructions. Simple drawing for kids and beginners.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
How to draw sofa step by step
Step 1
Start by using curved lines to enclose an irregular rectangle. This forms one of the back cushions of the couch.
Step 2
Use three curved lines to enclose the second rectangle next to the first one. This forms the remaining rear cushion.
Step 3
Use curved lines to enclose two irregular shapes, made almost like a circular parallelogram, underneath the two cushions. These shapes form the seat cushion of the sofa.
Step 4
Remove part of the nearby cushions to make room for the arm of the couch. Enclose a rounded rectangle, note the bulge in the top corner. Use a curved line to enclose the keyhole shape at the front, giving the couch a three-dimensional appearance. Place two small shapes between the top of the back cushion and the arms, forming the back of the sofa.
Step 5
Draw the far arm of the couch. First, sketch a keyhole shape in front of the couch. Then, connect it to the back cushion with a straight line.
Step 6
Use curved lines to enclose the narrow rectangles below the seat cushion, forming the front of the cushion.
Step 7
Use curved lines to enclose a rectangle underneath one of the couch cushions. This forms ruffles in the front of the couch.
Step 8
Use curved lines to enclose the rectangles below the rest of the cushions and the close arms. Connect their corners with a short curved line. This completes the outline of the couch.
Step 9
Draw decorative throw pillows, erase as needed. For each pillow, place a rounded square, then detail with curved lines at its corners, sides, and center.
Step 10
Color your couch. The couch comes in a variety of colors and patterns to suit all tastes and decor styles.

March 14, 2023
How to draw anime Bunny Step by Step | Easy drawing a Bunny
How to draw anime Bunny with this how-to video and step-by-step drawing instructions. Cartoon drawing tutorials for beginners and everyone.
Please see the drawing tutorial in the video below
You can refer to the simple step-by-step drawing guide below
Step 1
Okay, let’s start with the basic outline of the bunny first, which is a series of circles, curves, and lines. We will also add a cute carrot next to it.
Step 2
Now we will add the right ear. Then draw the nose and mouth. Outline the forefoot and add curves on the foot to show each toe. Make some more carrots.
Step 3
Add a small bun on top and make the other ear. Draw the stupid tail (from my own. mixture of soft and spongy). Outline the back hairs. Draw a hairy belly and add a carrot. Draw a bite on the carrot to represent
Step 4
This is what it will look like when you’re done. I hope you enjoyed this guide. Until next time, peek or guy, peace.
Step 5
Finally, choose the right color to color your drawing

March 13, 2023